494309

Marmitek LWM1 Manual

7
Zoom out
Zoom in
Previous page
1/103
Next page
INSTRUCTIONS FOR USE - LWM1™
BUILT-IN DIMMER MODULE
INTRODUCTION
Congratulations on the purchase of the Marmitek X-10 built-in
dimmer module LWM1.
• Because of its extremely small proportions, the module can be
built in behind wall switches and wall outlets (minimal
backbox depth 40mm, advice 50mm). The module is also
ideally suited to build in light armatures and for installation in
small spaces in for instance lowered ceilings.
• Multi-purpose: fully free choice in brand, colour and model
switch material. With the built-in dimmer you can switch and
dim 230V light bulbs, 230V halogen lighting and low voltage
halogen lighting with electronic transformer suitable for phase-
ingate up to 120 Watt.
• The module can be controlled by Momentary switches
connected to the module or at a distance, making use of the
Marmitek X-10 (plc) signal through the power line.
• In case of a voltage cut-off, the module will save the reading
prior to the cut-off. (dim level/off).
Please note: due to heat generation, apply no more than
one module per flush socket / central socket!
FUNCTIONS
• Local control via the switch attached to the module or remote
control using Marmitek X-10.
• Built-in dimmer, 120W.
• Two-way X-10: transmits the set dimmer level to other LWM1,
LD11, LW12 and LW11 modules (set to the same HouseCode
and UnitCode).
• Softstart and softdim.
• Memory function for last dimmer setting.
• Responds to ON, OFF, DIM, BRIGHT and extended X-10
(dimmer setting originates from other LWM1 modules).
LWM1
TM
7
ENGLISH
20160_20070423_UG_LWM1 26-04-2007 16:28 Pagina 7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek LWM1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek LWM1 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info