494339
2
Zoom out
Zoom in
Previous page
1/2
Next page
IR Eye
Universal
IR Extender
Cable
For Marmitek®, Xantech®,
Microsoft® Media Center etc.
EN
DE
FR
ES
IT
NL
Smart Solutions at Homewww.marmitek.com
Installation
The infrared LEDs have a self-adhesive tape on
the back. Use this to stick them onto the IR
sensor of your A/V equipment. This should be
done precisely. Test the position of the IR LEDs
first.
ATTENTION: If you are only connecting one
A/V device, then you don't need to use the
second IR LED. Never remove this LED from
the wire!
Installation
Die Infrarot-LEDs sind mit einer selbstklebenden
Folie versehen. Somit können Sie die beiden IR
LEDs auf dem Infrarotsensor Ihrer Geräte
befestigen. Achtung, das erfordert große
Genauigkeit. Testen Sie erst die Position der IR
LEDs bevor Sie diese auf das Sensor kleben.
ACHTUNG: Wenn Sie nur ein Gerät
bedienen wollen, lassen Sie den zweiten IR
Sender dann ungenutzt. Entfernen Sie
diesen niemals vom Kabel!
Installation
Les LED infrarouges sont équipées d’un film
auto-adhésif. Cela vous permet de coller les
deux LED IR sur le capteur IR de votre
équipement A/V. Attention : faites en sorte
qu’ils soient positionnés de façon très précise.)
Testez au préalable la position des LED IR avant
de les coller sur le capteur IR.
ATTENTION: Lorsque vous n’utilisez quun
seul appareil, l’autre LED IR reste hors
d’usage. N’enlevez jamais cet LED IR du
câble!
Instalación
Los LED infrarrojos están provistos de una
lámina autoadhesiva. Con esta puede fijar los
pequeños transmisores en el sensor infrarrojo
de sus aparatos. Ha de posicionarlos con mucha
precisión. Compruebe la posición de los LED IR
antes de pegarlos en el sensor infrarrojo.
ATENCIÓN: Si utiliza solamente un aparato,
deje el segundo transmisor infrarrojo
fijado al cable. ¡Nunca lo quite del cable!
Installazione
I LED a infrarossi sono provvisti di una pellicola
autoadesiva. In questo modo potete fissare
entrambi i trasmettitori sul sensore IR
dell’impianto. Attenzione: questoperazione
richiede precisione. Controllate la posizione dei
LED IR prima di attaccarli sul sensore.
ATTENZIONE: Se si utilizza solo un singolo
apparecchio, non occorre usare il secondo
trasmettitore IR. Non staccarlo mai dal
cavo!
Installatie
De infrarood LED’s zijn voorzien van een
zelfklevende folie. Hierdoor kunt u de IR LED's
op de IR vensters van uw A/V apparaten
bevestigen. Let op, dit komt nauwkeurig. Test
eerst de positie van de IR LED’s voordat u ze
vastplakt op het IR venster.
LET OP: Gebruikt u maar één A/V apparaat,
dan laat u de tweede IR LED ongebruikt.
Verwijder deze nooit van de kabel!
Copyrights
Marmitek is a trademark of Marmidenko B.V.
IR Eye is a trademark of Marmitek B.V.
Microsoft is a registered trademark of Microsoft Cooperation
Xantech is a registered trademark of Xantech Corporation
Xantech and Microsoft are the property of their respective owners.
All rights reserved.
Job no.
Filename
Colours
IR_Eye_Artwork.ai
Marmitek, +31 40 21 22 831
23-11-2006
CYAAN MAGENTA YELLOW BLACK Die-cut
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IR Eye at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Eye in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info