494241
7
Zoom out
Zoom in
Previous page
1/40
Next page
The IR Receiver does not work together with some A/V apparatus and models which use
a higher IR frequency like for instance Bang&Olufsen (B&O) .
Ensure that the IR Receiver and the IR Extender Cable are correctly connected and that
these are plugged in properly.
Please ensure that the LEDs of the IR extender cable are placed correctly to the infrared
sensor of the A/V device, this has to be done very precisely. The exact position can be
found easily by shining at it with a flashlight.
Some IR windows from set-top and satellite boxes are very sensitive and are easily
disrupted. These devices then receive too much infrared light and will either work badly
or not work at all. Relocate the IR LED or IR Blaster so that less infrared light is received
via the IR window.
Do you have questions that were not answered in the above mentioned ?
Then look at www.marmitek.com.
5. TECHNICAL DATA
IR Module
Feed POWER: 100-240VAC 50/60Hz, 12VC 500mA (supplied).
Feed STATUS: 12VDC 200mA. Plug, - 5.5 mm outside / + 2.1 mm
inside (not supplied).
IR LEDs connections: 4 x 3.5 mm jack plug (mono).
IR Receiver connection: 1 Connector for maximal 3 parallel connected receivers.
Dimensions: 85x49x24xmm (fastening points inclusive).
IR receiver built-on
Frequency range: 30-60 KHz.
IR reception range: ± 10 metres.
Length of cable: 4 metres, extendable to max 300 metres (UTP or equivalent).
IR receiver: Reception indication LED.
IR reception angle: 90° (+45°/-45° from centre).
Dimensions receiver bloc: 32x13x12mm.
IR receiver built-in (optional)
Frequency range: 30-60 KHz.
IR reception range: ± 10 metres
Length of cable: 2 metres, extendable to max 300 metres (UTP or equivalent).
IR receiver: Reception indication LED.
IR reception angle: 90°(+45°/-45° from centre)
Dimensions receiver: Diameter 15.9 mm - Drilling size 16 mm - Length 50 mm
Built-in depth 55 mm - Maximal thickness of material 40 mm.
7IR CONTROL 8
TM
ENGLISH
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IR CONTROL 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR CONTROL 8 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info