613346
9
Zoom out
Zoom in
Previous page
1/68
Next page
IPTV Coax Pro 9
ENGLISH
4.5 Checking the installation
To verify correct installation, a number of checks need to be performed on
both the 1P-node and the 4P-node.
1. Check that the POWER lamp is lit, indicating the node is powered.
2. Check that the LINK light is lit, indicating the 1P-node is connected
correctly to the 4P-node.
3. Check that the SIGNAL QUALITY light turns green, indicating the
signal quality between the 1P-node and the 4P-node is very good.
4. Check that the LAN light is lit or flashing, indicating that the unit is
connected or data is being transferred, respectively.
In all other cases, please refer to Chapter 5, Frequently Asked Questions.
4.6 Use of the LPF-1000 coaxial filter
If you use analogue or digital television via a coaxial cable, we recommend
using the supplied coaxial filter. This filter prevents network signals from
leaving your house (security) and reflects the signal back into the coaxial
network, improving the signal quality. This filter does not affect your existing
coaxial signals such as TV, radio and telephony. Position the coaxial filter
directly at the point where the coaxial cable enters your home.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IPTV Coax Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IPTV Coax Pro in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info