494293
4
Zoom out
Zoom in
Previous page
1/56
Next page
I
P CAMER
A
SERIES
IP CAMERA
SERIES
IP Eye Anywhere - 10 - 11 - 20 - 21
IP RoboCam - 10 - 11 - 21
20272 / 20080623 IP Eye Anywhere™ / IP RoboCam
ALL RIGHTS RESERVED MARMITEK ©
QUICK INSTALLATION GUIDE 3
KURZ INSTALLATIONSANLEITING 11
GUIDE D’INSTALLATION RAPIDE 19
BREVE MANUAL DE INSTRUCCIONES 27
GUIDA RAPIDA ALL’INSTALLAZIONE 35
KORTE INSTALLATIE HANDLEIDING 43
2 © MARMITEK
ENGLISH
3
SAFETY WARNINGS
To prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a
bath, swimming pool etc.
Do not expose the components of your systems to extremely high temperatures or bright
light sources.
In case of improper usage or if you have altered and repaired the product yourself, all guarantees
expire. Marmitek does not accept responsibility in the case of improper usage of the product
or when the product is used for purposes other than specified. Marmitek does not accept
responsibility for additional damage other than covered by the legal product responsibility.
This product is not a toy. Keep out of reach of children.
Do not open the product: the device may contain live parts. The product should only be
repaired or serviced by a qualified expert.
Only connect the adapter to the mains after checking whether the mains voltage is
the same as the values on the identification tags. Never connect an adapter when it is
damaged. In that case, contact your supplier.
1 GETTING STARTED
Package Contents
Check the items contained in the package carefully. You should have the following items.
Once any item contained is damaged or missing, contact the local authorized dealer.
One Marmitek IP Camera with built-in web server
One Power Adapter
One External Antenna*
One Wall/ceiling bracket
One RJ45 network cable
One GPIO Connector**
One Installation CD-ROM with Ultra View software package and user manual (English)
One Quick Installation manual
System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet
WLAN: IEEE 802.11b/g (for wireless model)
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista/7/8
CPU: Intel Pentium III 800MHz or above
RAM: 128MB****** or 512MB***
Resolution: 800x600 or above
User Interface: Microsoft® Internet Explorer 6.0 or above
Mozilla Firefox 2.00 or above
Apple Safari 2 or above
*IP Eye Anywhere 11, IP Eye Anywhere 21, IP RoboCam 11, IP RoboCam 21 - ** IP RoboCam 10, 11, 21
***IP Eye Anywhere 20, 21, IP RoboCam 21 - ******IP Eye Anywhere 10, 11, IP RoboCam 10, 11
4 © MARMITEK
UltraView software
Platform: Microsoft® Windows® 2000/XP/Vista/7/8
CPU: Intel Pentium III 800MHz or above and 512MB RAM
for 1 camera connected
CPU: Intel Pentium 4 3.4 GHz or above and 2GB RAM
for 9 ~16 camera connected
Resolution: 1024x768 or above
2 SETTING UP THE CAMERA
Installing the Camera Stand
The IP Eye Anywhere comes with a camera stand,
which uses a swivel ball screw head to lock to the
cameras screw hole. When the camera stand is
attached, you can place the camera anywhere by
mounting the camera through the three screw
holes located in the base of the camera stand.
Installing the Wall Mount Kit
The IP RoboCam comes with a Wall Mount Kit,
which allows you to place your camera anywhere
by mounting the camera through the three screw
holes located in the base of the Wall Mount Kit.
ENGLISH
5IP EYE ANYWHERE™ / IP ROBOCAM
Connecting the IP Camera to LAN
Use the provided Ethernet cable to connect the camera to your local area network (LAN).
When you connect the AC power adapter, the camera is powered on automatically. You can
verify the power status from the Power LED on the front panel of the camera.
Once connected, the Link LED starts flashing green light and the camera is on standby and
ready for use now.
Connecting the Camera to WLAN
If you use a wireless network in your application environment, you need to attach the
included external antenna to the camera.
When the camera is powered on, the camera will automatically search any access point with
default” SSID.
NOTE If the camera cannot connect to your wireless network, you need to install the camera
in LAN and proceed with WLAN settings.
Connecting the Ethernet cable
Connecting the
External Antenna
6 © MARMITEK
3 ACCESSING THE CAMERA
Using IPFinder
1. Insert the Installation CD-ROM into your computers CD-ROM drive to initiate the
Auto-Run program.
2. Click the IPFinder item to launch the utility. The control panel will appear as below.
3. Once you get the IP address of the camera, launch the Web browser or UltraView to
access your camera.
TIP The Installation CD-ROM provides a setup program that allows you to install IPFinder
on your computer. To install IPFinder, click Install Software then select IPFinder on
the Auto-Run screen.
Accessing to the Camera
1. Open the Web browser on your computer (for example, Microsoft Internet Explorer in
this guide)
2. Type the default IP address (192.168.0.30) or the IP address found by IPFinder in the
Address bar, and then press [Enter].
3. When the login window appears, enter the default User name (admin) and
password (admin) and press OK to access to the main screen of the camera’s Web
Configuration.
4. Right click and select Install Active X Control.
5. Click Install.
Display the connected camera(s).
Double click to link the Camera.
Click Search to find the IP address of
the connected camera(s).
Click Change IP to modify the IP
address of the selected camera.
Click Exit to close the utility.
ENGLISH
7IP EYE ANYWHERE™ / IP ROBOCAM
6. Click Setup and then Smart Wizard to set up your camera quickly. The Smart
Wizard will guide you through the necessary settings with detailed instructions on
each step.
4 TIPS
- For more information, please refer to the Advanced Installation Guide on the provided
Installation CD-ROM.
-
For details of operating UltraView, please refer to the Software User Guide on the provided
Installation CD-ROM.
- If you have any problem on the product(s), please contact your local authorized dealer.
Enter the User name and Password.
Enter the IP address of the camera here.
8 © MARMITEK
TECHNICAL DATA
ENGLISH
9IP EYE ANYWHERE™ / IP ROBOCAM
10 © MARMITEK
ATTENTION
This appliance is designed to be used in all EU and EFTA countries.
Attention: The use of this product may be restricted in the following countries:
• Belgium: 2.4 GHz Frequency. The use of this frequency may be restricted in some areas. See
http://www.bipt.be for current information.
• France: 2.4 GHz Frequency. The use of channels other than: 10, 11, 12, 13 (2457, 2462,
2467, and 2472 MHz) may be restricted in some areas. See l’Autorité de Régulation des
Télécommunications (http://www.art-telecom.fr) for current information.
Environmental Information for Customers in the European Union
European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its
packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product
should be disposed of separately from regular household waste streams. It is your responsibility to dispose of
this and other electric and electronic equipment via designated collection facilities appointed by the government or local
authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human
health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste
disposal service, or the shop where you purchased the product.
DEUTSCH
13IP EYE ANYWHERE™ / IP ROBOCAM™
Verbinden der IP Kamera mit einem LAN
Verwenden Sie das beigelegte Ethernet-Kabel, um die Kamera mit Ihrem lokalen Netzwerk
(LAN) zu verbinden. Sobald das Netzteil angeschlossen ist, wird die Kamera sofort mit Strom
versorgt. Sie können über die Betriebs-LED an der Frontseite der Kamera den Betriebszustand
des Gerätes überprüfen. Sobald die Stromversorgungsverbindung besteht, blinkt die Link-
LED grün. Die Kamera ist sofort betriebsbereit.
Verbinden der Kamera mit einem WLAN
Wenn Sie ein drahtloses Netzwerk nutzen, müssen Sie die beigelegte externe Antenne an
der Kamera anbringen.
Sobald die Kamera mit Strom versorgt wird, sucht das Gerät automatisch nach einem
Zugriffspunkt mit der SSID „default”.
HINWEIS Falls die Verbindung der Kamera mit Ihrem drahtlosen Netzwerk fehlschlägt, müssen
Sie die Kamera mit einem LAN verbinden und die WLAN-Einstellungen darüber vornehmen.
Anschließen der
externen Antenne
Hier Ethernet-Kabel anschließen
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IP Eye Anywhere 21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IP Eye Anywhere 21 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 12,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info