494240
9
Zoom out
Zoom in
Previous page
1/56
Next page
GIGAVIEW 545
7
ENGLISH
FREQUENTLY ASKED QUESTIONS
I do not get any signal.
x Check if the units are connected to the mains and if the channel setting
[2] is the same on both units.
x Check if both units are in the ‘ON’ position [7].
x Check if the receiving TV is on the correct A/V channel.
The signal received is poor.
x Try another channel (the channel settings must be the same on both
units).
x Move transmitter and/or receiver from the immediate vicinity of the
connected A/V devices. These may affect the range.
x You are (almost) out of range.
x Changing the position of the transmitter and / or receiver a few
centimetres may rectify the problem.
x Try again with shorter distances.
The images and sound are perfect, but the infrared return signal does
not work.
Check the following:
x Depending on the local situation the A/V signal can reach further than
the signal of the IR receiver. Try again with shorter distances.
x Has the IR emitter been properly connected to the AV transmitter?
x Has the IR emitter been properly placed near the IR window of your A/V
device?
I do get images but no sound.
x The GigaView 545 can send analogue stereo signals, such as Dolby
Surround. Digital systems such as Dolby 5.1 or Dolby Digital cannot be
transmitted.
Does the GigaView 545
TM
cause a conflict with my wireless network
(WLAN) ?
x No, WiFi uses the 2.4Ghz frequency band. The GigaView 545 uses the
5.8GHz frequency band. In cases where a 2.4GHz video transmitter
experiences interference from for instance a WiFi network, the GigaView
545 can be the right solution.
Can I combine multiple receivers?
x Yes. However, the signal will be the same on all receivers.
Do you still have questions?
Check out www.marmitek.com for more information.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek GigaView 545 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek GigaView 545 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info