494237

Marmitek GigaVideo70 Manual

4
Zoom out
Zoom in
Previous page
1/52
Next page
1 SET CONTENTS.
1 Transmitter.
1 Receiver with modulator.
2 Power adapters.
1 RCA/RCA cable.
1 Scart/RCA adapter.
1 RCA/Mini DIN cable.
1 Scart/scart RCA adapter.
1 3.5 mm jack plug/RCA adapter (audio).
1 IR extender with 3 LEDs.
1 User manual.
2 SETTING UP THE GIGAVIDEO70™ TRANSMITTER.
1. Connect the wire with the Mini DIN plug (small connector with pins) to the Mini DIN
connector of the transmitter [C].
2. Connect the other end of the cable to the Audio/Video OUT jacks of the video source
you want to transmit the signal from (e.g. your VCR, DVD, Satellite or TV: connecting the
transmitter to your VCR or Satellite receiver, allows you to choose channels independent
from your main TV). If your video source is equipped with a SCART connector use the
SCART Adapter labelled TRANSMITTER (the one with the extra wires attached on the
side). If there already is a SCART cable attached to the SCART connector of your source,
un-plug it first. Now plug in the SCART Adapter labelled TRANSMITTER.
To re-establish your existing connection plug in your original SCART cable into the back
of the SCART Adapter. Connect the Audio/Video cable from the transmitter to the
yellow, red and white connectors of the SCART Adapter. See the picture for more details.
3. Set the Channel-switch [A] on A.
4. Switch the Power slide switch [B] into the 'OFF' position.
5. Plug the supplied mains adaptor into a wall outlet and connect the plug at the rear side
of the transmitter [E]. Only use the supplied mains adaptor!
6. Switch the Power switch [B] to the ‘ON’ position.
7. Position the transmitter in a convenient location and orient the antenna [K].
8. Put the side antenna [J] in an upright position.
4 MARMITEK
GIGAVIDEO70™ TRANSMITTER
TO SCART
VIDEO
SCART ADAPTER
"TRANSMITTER"
ORIGINAL SCART CABLE TO TV
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek GigaVideo70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek GigaVideo70 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info