489107
29
Zoom out
Zoom in
Previous page
1/44
Next page
iTaLiaNo
29GIGAVIDEO580™
6. Commutare l’interruttore accensione [B] sulla posizione ON
7. Posizionare il ricevitore in un luogo conveniente, possibilmente con spazio libero intorno,
ed orientare l’antenna in direzione del trasmettitore [K].
5. INSTALLAZIONE DELLA PROLUNGA IR
1. Collegare la prolunga IR all’ingresso [F] al lato posteriore del trasmettitore.
2. Togliere la protezione di uno dei LED IR. Mettere questo LED IR sulla finestra IR
dellapparecchio A/V da comandare. Non applicarlo ancora per bene. Prima di fissare il
LED IR definitivamente, si consiglia di verificare se funziona. Per ciò puntare il telecomando
originale sulla finestra al lato anteriore del ricevitore e scegliere alcuni canali. Se lapparecchio
A/V non reagisce, può essere che il LED IR non è stato applicato al posto giusto; per alcuni
apparecchi il posto è critico.
3. Eventualmente si può utilizzare il secondo LED IR per il comando di un secondo apparecchio
A/V. Se questo LED IR non viene utilizzato, non toglierlo mai.
Al lato anteriore del trasmettitore GigaVideo580™ si trova anche un LED IR trasmettitore.
Se questo è puntata a distanza breve verso la finestra IR dell’apparecchio A/V, potete anche
realizzare il canale di ritorno IR.
6. MESSA A PUNTO DEL SET GIGAVIDEO580™
Assicurarsi che la fonte del segnale Audio/Video sia accesa. Commutare la TV a cui è stata
collegata il GigaVideo, sull’ingresso Scart. Normalmente occorre premere il tasto “0o AV”.
L’immagine dovrebbe essere già visibile, non sono richieste ricerche particolari sulla TV per il
collegamento del GigaVideo tramite Scart.
A causa della frequenza alta il segnale è leggermente sensibile alla direzione. Per questa
ragione le antenne sono state ideate in modo tale da poter girarle in ogni direzione.
Per l’ottima ricezione le piccole antenne paraboliche [K] devono guardarsi”, cioè devono
trovarsi perpendicolarmente luna rispetto all’altra. La distanza massima tra trasmettitore e
ricevitore dipende dalle circostanze locali.
Se non si ottiene alcun segnale:
1. Controllare se il selettore di canale [A] del trasmettitore e del ricevitore sono sullo stesso canale.
2. Controllare se ambedue le unità sono accese.
3. Controllare se la TV è impostata sull’apposito ingresso A/V.
Il segnale è debole:
1. Provare un altro canale (assicurarsi che entrambe le unità rimangano impostate sullo stesso
canale).
2. Spostare il trasmettitore e/o il ricevitore dalle dirette vicinanze dell’apparecchiatura
collegata. Questa apparecchiatura può infatti influenzare la portata del segnale.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Gigavideo 580 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Gigavideo 580 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info