122390

Marmitek easytouch Manual

5
Zoom out
Zoom in
Previous page
1/68
Next page
5EASYTOUCH 25
To allow direct control of all these appliances, in a convenient way, the ET25 has a
Touchscreen. The Touchscreen will only display the functions for controlling your specific
equipment.
The ET25 has unique features, combined with a big storage capacity, such as:
• "Macro" option: a total number of 20 key strokes can be stored under each of the
9 available Macro keys
• code learning, up to 40 keys per mode
• channel scan/search function
• video plus / show-view key
• All power off feature: to switch off all modes in 2 presses
• TV Volume/ Mute, whatever the last mode was selected
• Channel toggle key
• Customising of the screen, using a predefined list of symbols, according to your
specific needs
The ET25 contains a library of codes that are pre-programmed into the remote
control. This library covers nearly all the audio video products on the market today.
To make it easy for you to find the right code for your audio video appliance, we advise to
use the CODE SEARCH feature.
3 Installing the batteries
1. Open the cover on the back of the ET25
2. Insert 4 batteries (AAA size alkaline). Make sure the batteries are the same brand and
are NEW and observe polarities indicated inside the battery compartment.
3. All the user programmed parameters will be retained indefinitely during battery
replacement
4. Remove the plastic protection foil from the Touchscreen.
4 Description of the ET25 "rubber" keys
1: LED: Turns on whenever a rubber key or a Touchscreen key is pressed and indicates
when commands are being transmitted.
2: TV, VCR, SAT, CBL, DVD, AUDIO:
To select the appliance you wish to control.
3: POWER: to switch off the last selected appliance
4: VOL + / -: to control the volume
5: MACRO: to launch a macro (see chapter 10)
6: SET UP: to set the remote control for the appliance you wish to control. Allows the
access to secondary functions:
• Press and release the Setup key (A letter S appears on the top right hand
corner of the Touchscreen)
• Press the desired secondary function key (the "S" is turned off).
ENGLISH
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easytouch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easytouch in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info