494263

Marmitek EasyTouch Panel10 X-10 Manual

8
Zoom out
Zoom in
Previous page
1/65
Next page
6 © MARMITEK
Adding macros
It is also possible to define a button which will carry out the functions of between 1 and 4 other buttons. This is known as a
macro function. You first programme the individual buttons. If you use the macro button once this has been programmed,
the commands which you have selected under the programmed button will be carried out one by one.
Here, we provide you with an example of how you can add a macro button (25x25mm) which will carry out
two commands:
choose by pressing ‘
’.
ADD NEW BUTTON?, press ‘OK’
SIZE OF BUTTON, press ‘
’
LARGE, press ‘OK’
MACRO, HOUSE CODE , press ‘ ’
MACRO 1, press ‘OK’
TOUCH SCREEN NOW, press on the place where you want to programme the button until you hear
5 short and then one long beep.
STORED, your button is programmed.
TOUCH KEY 1 NOW, press on the button which you would like to be carried out first when using
the macro button.
TOUCH KEY 2 NOW, press on the button which you would like to be carried out second when using
the macro button.
TOUCH KEY 3 NOW, you can add a third and fourth command to the macro button. If you do not
want to, do not touch the screen again. After a few seconds you will see the message MACRO
STORED on the display. The new macro button has now been programmed.
6. EASYTOUCHPANEL10 AND SAFEGUARD OR TOTALGUARD ALARM SET
If you own the SafeGuard or TotalGuard alarm set, you can also switch your set on or off with the EasyTouchPanel10.
You can add the following push buttons:FULL ARM, HOME ARM, DISARM, PANIC.
If you add these push buttons, you are of course not supposed to show them in your own background. They should be
situated in a ‘secret’ place on your EasyTouchPanel10, only known by authorized persons. In the fold-out diagram you can
find the structure to program these buttons.
When you have programmed one of these push buttons, then follow the procedure ‘Registration of the key fob remote
control’ in the user manual of your SafeGuard/TotalGuard.
When asked to push a key of the key fob, you have to push the programmed push button (FULL ARM, HOME ARM,
DISARM or PANIC) on your EasyTouchPanel10. The base will emit a beep to confirm the action. The text ‘AFST X OK’ will
appear on the display.
You only have to execute this procedure once.
6(/(&786,1*µ!¶
$''1(:%87721"
%877216,=(
/$5*(;00
0$&52+286(!
0$&52
728&+6&5((112:
6725('
728&+.(<12:
728&+.(<12:
728&+.(<12:
0$&526725('
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek EasyTouch Panel10 X-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek EasyTouch Panel10 X-10 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info