494263

Marmitek EasyTouch Panel10 X-10 Manual

5
Zoom out
Zoom in
Previous page
1/65
Next page
3Easy Touch Panel 10™
Marmitek products are manufactured with great care and are of the highest quality. Please read this manual carefully
and follow the instructions to ensure you make the most of the opportunities offered by this product.
2. HOW DOES THE EASYTOUCH PANEL 10 WORK?
The way the EasyTouch Panel 10 works can be compared to an X-10 remote control. With this product, however, instead
of the fixed keys on a remote control, you can easily choose and define the position, size and role of each button yourself.
The EasyTouch Panel 10 wirelessly sends the Marmitek X-10 commands (RF) to your Marmitek X-10 transceiver, which
then places this on the power line. The installed Marmitek X-10 modules receive these commands and switch on or dim
the connected lights and appliances.
3. INSTALLATION (FACTORY SETTINGS)
Remove the lip in the middle of the back of the panel, by the battery holder by pulling it, so that the EasyTouch Panel 10
can be connected to a power source. The factory settings are now immediately active and you can test the functions.
Ensure that you have placed the Marmitek X-10 transceiver within the range of the control panel and that this is set
to the house code(s) to be used. This ensures that the RF signals from the EasyTouch Panel are converted into X-10
signals and are put onto the powerline. If you use a TM13 as transceiver, this will transfer all house codes if it is set
to house code P.
Memory (factory settings)
The EasyTouch Panel 10 has a built in memory for 2 configurations (MEMORY 1 and MEMORY 2). The factory settings
are saved in configuration 1. Configuration 2 is empty. You can programme both configurations 1 and 2 as you wish (see
Chapter 4. PERSONALISING YOUR EASYTOUCH PANEL 10).
Operating (factory settings)
The following diagram shows the commands that are pre-programmed as factory settings in EasyTouch Panel 10’s
MEMORY 1:
If you press on the first button, then address A1 ON will be sent. The appliances and/or lights that are at the address (A1)
will, therefore, go ON. And so on.
You can use the BRIGHT and DIM buttons to brighten or dim the light that you last operated.
Note: this only applies if a light (module) is installed at this address.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek EasyTouch Panel10 X-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek EasyTouch Panel10 X-10 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info