494273

Marmitek EasyControl 8 RF Manual

6
Zoom out
Zoom in
Previous page
1/56
Next page
6 MARMITEK
[1] (On/off)/Home control ‘All L(igh)ts on’ function
Switches the last selected device off. Some appliances can also be switched on by pressing
this button. It is also used to switch on all Marmitek X-10 Lamp Modules.
[2] TV, VCR, CBL DVD, AUDIO, ASAT, DSAT, Home Control button
You can select which device you want to operate by using these mode buttons. There are
a limited number of functions available for audio. The Home Control button is used to
operate the Marmitek X-10 Home Control Modules which control any lamps and devices
in and around the house.
[3] LEARN
Programming button for learning the functions of your original remote control. See chap-
ter 4.5, Learning codes, for information about programming these codes.
[4] SHOWVIEW
You can use the ShowView or VideoPlus function of your video recorder with this button
(if your video recorder supports this function). If your video does not support this function,
the button can give access to the timer function or the menu of your video recorder.
When the ShowView/V+ button is used in other modes than the VCR mode (TV, CBL, SAT,
AUDIO), this button is often used for the Scan function. For example, in TV mode you can
change channels or when listening to a CD you can only listen to the intros. After 3 sec-
onds, the button selects the following channel or song. Press any button to stop the Scan
function. The Scan function will automatically stop after 2 minutes.
[5] Mute/Home Control ‘All off’ function
Switches the sound on or off. You can also turn the volume of your TV on or off whenev-
er you are in VCR, DVD or SAT mode. This means that you do not have to switch over to
TV mode. This button is also used to turn off all Marmitek X-10 Home Control Modules.
[6] PROG +/-/Home Control ‘On’ and ‘Off’ function
Selects the next or previous channel on your TV or satellite receiver. In DVD mode it
selects the next or previous track. This button is also used to turn off all Marmitek X-10
Home Control Modules.
[7] VOL +/-/Home Control ‘Dim’ and ‘Br(igh)t’ function
Controls the volume. You can adjust the volume, also when you are in VCR, DVD or SAT
mode. You do not need to switch over to TV mode. This button is also used to dim and
brighten (‘Brt’ stands for Bright) lights that are connected to the Marmitek X-10 Lamp
Modules.
[8] INFO
Provides on-screen information for the device selected (if available).
[9] SETUP
This is where you program the remote control for use. This button gives access to some of
the secondary functions of certain audio/video equipment (Shift). Press the SETUP button
and then the desired function button.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek EasyControl 8 RF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek EasyControl 8 RF in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info