122830

Marmitek easy icon 10rf Manual

6
Zoom out
Zoom in
Previous page
1/98
Next page
INSTRUCTIONS FOR USE
USING THE WIZARD
After you insert the batteries and choose “English,” the Setup Wizard
screen appears. You can exit the Wizard at any time by pressing the
HOME key (located just below the screen). Follow the instructions on
the Wizard screens to familiarize yourself with the OK, Back, and Side
Keys.
You can go back and forth through the Wizard, but once you’ve set up your devices and
quit to save the settings, you won’t see the Wizard again unless you do a Master Reset.
To do a Master Reset: Press the HOME key, Setup, More, Advanced, Clear
Settings, More, and then Master Clear. Note this will erase everything you have set
up in the remote.
SETTING UP YOUR DEVICE
After you’ve been through the Wizard for the first time, the screen shown to the right
appears. This is the start of the Wizard for setting up your devices (TV being the first
one).
If you know your brand of TV, select Yes, which results in a faster
search for your TV’s code. Selecting No searches the complete library
of TV codes, rather than just the codes for your brand of TV.
Pressing the Side Key for Yes takes you to the screen that shows the
most common brands. Use the Side Keys to select your brand of device.
If your brand isn’t shown, you can press the Side Key adjacent to Next
to show more brands, (shown alphabetically); or press the Side Key
adjacent to Back to go back to the previous screen of brands.
After you select your brand, the next screen tells you to point the remote at your TV
and keep pressing Power until it responds.
Pressing Power sends the Power code to your TV, and the screen shows that you’ve sent
code 1 of xx (xx will vary by brand). Keep pressing Power until your TV responds and
then press Save. (You can press the Side Key adjacent to Last Code if you overshoot).
6 © MARMITEK
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek easy icon 10rf at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek easy icon 10rf in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info