Manual Marmitek DoorPhone 150 (page 8 of 140) (English, German, Dutch, French, Italian, Spanish)

613674

Zoom out

Zoom in

1/140

6. Now the unit can be switched on and ready for operation. Taking out

the unit or keeping it placed in the charger stand will cause no

damage to the battery. In the latter case, when the battery is being

consumed and the voltage falls to a certain level, the charger stand

will automatically charge up the battery. The segments inside the

icon

will flash in turn whenever the unit is under charged.

CAUTION: BE SURE THE BATTERY IN THE HANDSET IS A

RECHARGEABLE TYPE BEFORE YOU PLACE IT IN THE CHARGER

STAND, OTHERWISE AN EXPLOSION MAY RESULT.

PAIRING THE HANDSET AND DOOR UNIT

This process is to match the Door Unit with the handset so that they can

communicate with each other and so that no other devices (even a

doorphone of an identical model) can interfere with you or the receiving of

your signal.

The Door Unit and handset are already paired with a factory pre-set code

when they are shipped from the factory. However, we recommend pairing

them again to achieve better privacy and to avoid a false triggering of a

door lock from a nearby doorphone system.

To perform the pairing process, it is necessary to use alkaline batteries as

the power supply in the Door Unit, while the12V DC supply should be

disconnected temporarily.

1. Place the Door Unit and handset close to each other within a

distance of 1m.

2. With the handset in switch off mode, press and hold the Power

ON/OFF button

and the door lock open button together

for around 3 sec to enter pairing mode. The LCD will become

backlighted and show a flashing letter “ ”.

3. Press and hold the pairing button

at the back of the Door Unit

while installing the alkaline batteries. The call indicator

will start

flashing after 3 sec, showing that the Door Unit has entered pairing

mode.

Perform the same for the Door Unit that is intended to be used at the

back gate (option, not included).

4. Now release the pairing button

, press call button on the

front gate Door Unit (DO NOT press the call button on the back gate

Door Unit.). Two “Di Di” sounds will be heard and at the same time

the letter “ ” and (or in case there is a back gate Door Unit)

will show steady in LCD on the handset once pairing is successful.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek DoorPhone 150 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek DoorPhone 150 Manual

Product: