Manual Marmitek DoorGuard 350 (page 7 of 68) (English, German, Dutch, French, Italian, Spanish)

494281

Zoom out

Zoom in

1/68

DOORGUARD350

ENGLISH

Step 1. Mounting the doorbell camera onto the

door frame.

x Drill a hole (15mm) in the door frame at the height that you

want to mount the doorbell camera.

x Pass the power cable through the hole in the rain cover and

through the door frame.

x Attach the camera and rain cover to the frame with the screws

supplied.

x Cover the screw holes in the camera with the caps supplied.

Step 2. Connecting the cable for the camera.

x The additionally supplied cable for the connection of the camera,

has a black male connector at the camera end and a 4 U

connector at the monitor end. Click the black connector of the

doorbell camera onto the black male connector of the

additionally supplied cable. Guide the cable to the spot where

the monitor is to be mounted (Beware: there should be a power

socket in the area).

x Mount the wall plate onto the wall using the four supplied

screws.

Step 3. Mounting the monitor onto the wall.

x Take the monitor and secure the cable’s 4 U-connectors in the

correct order under the 4 connectors.

x Connect the power adapter with the backside of the monitor.

x Now place the monitor against the wall plate and move it up and

down against the plate such that it snap-locks onto the plate.

x Your DoorGuard350™ has now been installed successfully and is

ready to use.

x You can always slide off the monitor by sliding it upwards.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek DoorGuard 350 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek DoorGuard 350 Manual

Product: