Manual Marmitek CM15Pro (page 5 of 64) (English, German, Dutch, French, Italian, Spanish)

494264

Zoom out

Zoom in

1/64

3. Some (old) devices are able to disturb the signal by transmitting noise on the power

line. Because the Marmitek X-10 signals are transmitted on 120 kHz, only noise on

or near this frequency will have influence on the range. When you use a FM10 Filter

to connect this device to the power line, the noise will be filtered.

4. The Marmitek X-10 protocol has several mechanism to avoid modules to be switched

on or off by other sources than your Marmitek X-10 Controllers. However, it is possi-

ble that the Marmitek X-10 signals are disturbed by e.g. baby phones which are in

TALK mode (continuous transmission). When these kind of signals are present on the

power line it is possible that the Marmitek X-10 signals will not come through.

5. The mains do not stop at the front door of your home. Everything that is attached

to mains nearby your home can have influence on Marmitek X-10 signals (e.g. heavy

machinery). If you think that your system is influenced by devices out of your house,

it is advisable to install FD10 Phase Coupler/Filter on each phase entering the house.

These filters will block signals coming into or going out of your house, but will also

match the impedance for the mains. Hereby make your house Marmitek X-10 com-

patible for these units. The FD10’s will not only filter but will also couple the phases

(please see 1).

USER MANUAL

Introduction

The Marmitek ActiveHomePro (AHP) software, in conjunction with the CM15Pro

Programmable Computer Interface, lets you control lights and appliances around your

home when used with Marmitek X-10 Modules.

The CM15Pro is a controller with Transceiver function: When it receives a command

from a wireless remote control (f.e. EasyControl8/EasyTouch35/KR21/SS13), it sends dig-

ital signals over your existing house wiring to Modules that receive the signals and exe-

cute the command.

You now have the power to control your whole home from your computer! With the

Marmitek AHP software and your X-10 Modules you can create schedules for your lights

and appliances, set up groups of commands for your daily life, and keep lights and appli-

ances off when they’re not in use. You can make AHP save the timer’s schedules and

Macro Events in the CM15Pro memory, so that they run even when your computer is

turned off! Use Marmitek AHP to make your home more comfortable, and more secure.

This Installation guide shows you how to install your CM15Pro and Marmitek AHP soft-

ware. Use this Installation guide as a guide to get you started, but be sure to read the

help information after installation.

5CM15Pro

™

+ ActiveHome Pro

™

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek CM15Pro in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek CM15Pro Manual

Product: