Manual Marmitek AM12 (page 4 of 44) (English, German, Dutch, French, Italian, Spanish)

494302

Zoom out

Zoom in

1/44

HOW DOES MARMITEK X-10 WORK?

Marmitek X-10 components use the existing mains wiring to communicate

(using Marmitek X-10 signals). You can build a complete system using the

three different kind of components of the Marmitek X-10 System:

1. Modules: These components will receive Marmitek X-10 signals and will

switch or dim the attached lamp or appliance. Examples of these modules are

lamp modules and appliance modules. These are available as build-in, micro,

DIN rail and plug-in modules.

2. Controllers: These components will transmit Marmitek X-10 signals and

thus will control the Modules.

3. Transmitters: Wireless components like remotes. The signals of these

components will be received by a controller with transceiver functionality

(IRRF 7243, TM13, CM15Pro…..). The Transceiver will translate the signals into

Marmitek X-10 signals on the power line.

ADRESSES

Up to a maximum of 256 different addresses can be preset. These are

subdivided into a so-called HouseCode (A to P incl.) and a UnitCode (1 to 16

incl.). The HouseCode can also be set on the controllers, so that the controllers

and modules become part of the same system. The address can be set either

using code dials or by pressing buttons, depending on the type of module.

The Marmitek X-10 System uses standard commands, which control all units

with the same HouseCode at the same time (e.g. all lights on, all units off,

etc.).

SIGNAL RANGE

Range of Marmitek X-10 signals over the Power Line and how to

increase the range.

The Marmitek X-10 System is based on power line communication. The range

of the Marmitek X-10 signals very much depends on the local circumstances.

On average the range is a cable length of 80 meters.

If you have difficulties with the range of your Marmitek X-10 signals,

please pay attention to the following facts:

1. When more than one phase is used for your electrical system, it is necessary

to couple these phases for the Marmitek X-10 signals. For coupling you can use

FD10 Phase Couplers/Filters. You only need to install a Phase Coupler/Filter

when your wall outlets and light switches are divided over more than one

phase (more than one group is no problem). For bigger buildings or longer

distances we advice you to use an active repeater instead of passive FD10’s.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek AM12 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek AM12 Manual

Product: