601458
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
Procedure ffor EEntering tthe AAddress
1. Connect the Control Unit, Keyboard, and
transformer. Do not turn the Control Unit on yet.
2. Leave (!) the signal control module with the
home signal mast connected to it in its original
packaging. Connect only the brown and the
yellow wires from the signal control module to
the brown and red (!) terminal clips on the
Control Unit.
3. Set the Keyboard address to the desired
address. In our example (Keyboard No. 1)
all 4 coding switches at the "off" position.
4. Turn on the 6021 Control Unit. Press the
"stop" button.
5. Press the "go" button. The track block signal
will begin to switch between 2 signal aspects. If
the following step does not begin within several
seconds (approx. 30 sec.), the electronic circuit
will end the address setting process automati-
cally.
6. Press the green button on pair of buttons 3 of
the Keyboard, until all of the LED's on the home
signal light up. Only release the button at this
point.
7. Turn the Control Unit off. The signal and the
signal control module can now be installed on
the layout.
Note:
· For long breaks during programming, the sig-
nal terminates the programming mode without a
change. In this case, start from the beginning
again with the complete addressing procedure.
While addressing is taking place, ensure that
the breaks between the individual keyboard
commands are not too long.
· Once the programming has ended or has been
cancelled, the signal switches to demonstration
mode after a few seconds. In this mode, various
signal aspects of the respective signal type are
displayed.
- The control electronic circuit must be removed
from the packaging before testing the signal.
76371.qxd 16.04.04 16:24 Seite 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marklin Lichtafsluitsein 76371 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marklin Lichtafsluitsein 76371 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info