Function
This locomotive has a universal electronic
circuit and offers the following features:
● Can be operated with conventional AC power
(no. 6646 or 6647 Transformer, 32 VA),
Märklin Delta, Märklin Digital or Märklin Systems.
This locomotive is not designed for operation
with locomotive controllers for other systems
(examples: DC power, pulse width control,
multi-train controls of other makes).
● The mode of operation is set manually with the
coding switches. This locomotive comes from the
factory set for the “AC power” mode of operation.
An address must be set manually with the coding
switches for operation with Delta, Digital or
Märklin Systems.
● Headlights change over with the direction of travel.
The brightness of these headlights depends on
the voltage present in the track.
The maintenance work required with normal
operation is described below. Please see your
authorized Märklin dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in those cases
where parts neither manufactured nor approved by Märklin have been
installed in Märklin products or where Märklin products have been
converted in such a way that the non-Märklin parts or the conversion
were causal to the defects and / or damage arising. The burden of
presenting evidence and the burden of proof thereof, that the instal-
lation of non-Märklin parts or the conversion in or of Märklin products
was not causal to the defects and / or damage arising, is borne by
the person and / or company responsible for the installation and / or
conversion, or by the customer.
Safety Warnings
● This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647
AC transformer, Märklin Delta, Märklin Digital
or Märklin Systems).
● This locomotive must never be supplied with
power from more than one transformer.
● Pay close attention to the safety warnings in the
instructions for your operating system.
5
