6620
30
Zoom out
Zoom in
Previous page
1/56
Next page
ENGLISH
27
The signal cannot be converted from the
component to the video or S-video.
Notes of OSD menu:
The setup menu can be displayed through all
video out (COMPONENT, S-VIDEO, VIDEO).
The setting informations (e.g. volume setting) are
displayed through all video out when the VIDEO
CONVERT function are set ENABLE.
Note:
No setting information is displayed when the
signal is emitted from the COMPONENT IN to
COMPONENT OUT.
The setting informations (e.g. volume setting) are
displayed through the S-VIDEO or VIDEO out
when the VIDEO CONVERT function are set
DISABLE. When the S-VIDEO and VIDEO
outputs are used simultaneously, the setting
informations are displayed through the S-VIDEO
out only.
SELECTING THE SURROUND MODE
Example: AUTO SURROUND
To select the surround mode during playback,
press the SURROUND MODE button on the front
panel or the Surround mode buttons on the
remote.
VIDEO CONVERT
When this function is activated, the video or
S-video signal can be emitted from the video, S-
video or component video output terminal.
To activate this function, select VIDEO CONVERT
in PREFERENCE menu and set ENABLE.
Notes:
The component video signal is emitted only from
component video output terminal.
When the video equipment is connected by
component terminal, connect the monitor and
ZR6001 by the component terminal.
This function is unavailable for the REC out
terminal.
This function is unavailable for the still picture, fast
forward and reverse playing of the video component.
If, while attempting to use the video convert
feature, the ZR6001 cannot synchronize with the
display device, NO SIGNAL appears on the
monitor, or noise is generated, this feature cannot
be used. All of these signs are caused by
equipment incompatibility; there is nothing
wrong with the ZR6001.
In such case, set VIDEO CONVERT in the
PREFERENCE menu to DISABLE. Also, connect
the video input signal to the display device via the
MONITOR OUT terminal under VIDEO and the
S-video input signal to the display device via the
MONITOR OUT terminal under S-VIDEO.
Example:
Monitor is connected with the component.
Monitor is connected with the video or S-video.
BASIC OPERATION
(PLAY BACK)
SELECTING AN INPUT SOURCE
Before you can listen to any input media, you must
first select the input source on the ZR6001.
Example : DVD
To select DVD, turn the INPUT FUNCTION
SELECTOR knob on the front panel or simply
press the DVD button on the remote.
After you have selected DVD, simply turn on the
DVD player and play the DVD.
As the input source is changed, the new input
name will appear momentarily an OSD
information on the video display. The input
name will also appear in the display, on the
front-panel.
As the input is changed, the ZR6001 will
automatically switch to the digital input,
surround mode, attenuation, and night mode
status which were entered during the
configuration process for that source.
When an audio source is selected, the last video
input used remains routed to the VCR1 & DSS/
VCR2 Outputs and Monitor Output. This
permits simultaneous viewing and listening to
different sources.
When a Video source is selected, the video
signal for that input will be routed to the Monitor
Output jacks and will be viewable on a TV
monitor connected to the ZR6001.
If a component video input is connected to the
DVD or DSS component inputs, it will be routed
to the Component Video Output. Make certain
that your TV is set to the proper input to view the
signal.
ADJUSTING THE MAIN VOLUME
Adjust the volume to a comfortable level using the
VOLUME control knob on the front panel or VOL
/ buttons on the remote.
To increase the volume, turn the VOLUME knob
clockwise or press VOL
button on the remote, to
decrease the volume, turn counterclockwise or
press VOL button on the remote.
Notes:
The volume can be adjusted within the range of
to 18 dB, in steps of 1 dB.
However, when the channel level is set as described
on page 22, if the volume for any channel is set at
+1 dB or greater, the volume cannot be adjusted up
to 18 dB.
(In this case the maximum volume adjustment
range is 18 dB - Maximum value of channel level)
ADJUSTING THE TONE (BASS &
TREBLE) CONTROL
During a listening session you may wish to adjust
the Bass and Treble Control to suit your listening
tastes or room acoustics.
(Using the remote control unit)
To adjust the bass effect, press BASS or BASS
on the remote.
To adjust the treble effect, press TREBLE or
TREBLE on the remote.
Note:
The tone control function can work in the AUTO
Surround, Stereo, Dolby PL
IIx
, DTS, DTS-ES,
and Multi Ch. Stereo mode.
CH.SEL LIP.SYNC
PTY
SUB-T/ATT
AUDIO
INPUT/DISC+
F.DIRECT
RDS
TUNE/SEARCH
T-MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN/V-OFF
7.1CH IN
STEREO
MCH-ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES VIRTUAL
321
654
98
0
7
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
AMP
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
AUX1
SURROUNDSURROUND
DISPLAYDISPLAY
PUREPURE
SETUPSETUPDIRECTDIRECT
SIMPLESIMPLE
AUTOAUTO HT-EQHT-EQ MENUMENU
ENTERENTER
MEMORYMEMORY CLEARCLEAR
T-MODET-MODEEXITEXIT BANDBAND
MODEMODE
VIDEO
or S-VIDEO
or component
component
SURROUNDSURROUND
DISPLAYDISPLAY
PUREPURE
SETUPSETUPDIRECTDIRECT
SIMPLESIMPLE
AUTOAUTO HT-EQHT-EQ MENUMENU
ENTERENTER
MEMORYMEMORY CLEARCLEAR
T-MODET-MODEEXITEXIT BANDBAND
MODEMODE
VIDEO
or S-VIDEO
VIDEO
or S-VIDEO
SURROUNDSURROUND
DISPLAYDISPLAY
PUREPURE
SETUPSETUPDIRECTDIRECT
SIMPLESIMPLE
AUTOAUTO HT-EQHT-EQ MENUMENU
ENTERENTER
MEMORYMEMORY CLEARCLEAR
T-MODET-MODEEXITEXIT BANDBAND
MODEMODE
VIDEO
or S-VIDEO
component
TUNE/SEARCH
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN/V-OFF
7.1CH IN
STEREO
MCH-ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES VIRTUAL
DTS
PURE DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SET UP/
ENTER
SURROUNDSURROUND
DISPLAY
PUREPURE
SETUPSETUPDIRECTDIRECT
SIMPLESIMPLE
AUTOAUTO HT-EQHT-EQ MENUMENU
ENTER
MEMORY CLEAR
T-MODEEXIT BAND
MODEMODE
DISP MULTI AUTO TUNED
SLEEP
SURR
AUTO
DIRECT
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
AMP
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
ENTER
AUX1
SURROUND
DISPLAYDISPLAY
PURE
SETUPDIRECT
SIMPLE
AUTO HT-EQ MENU
ENTER
MEMORYMEMORY CLEARCLEAR
T-MODET-MODEEXITEXIT BANDBAND
MODE
EAK ANALOG
DIGITAL
ATT
B EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL S SR
LFE
ZR6001U DFU_01_ENG 2_2 06.3.6, 4:28 PMPage 27 Adobe PageMaker 6.5J/PPC
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz ZR-6001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz ZR-6001 in the language / languages: English as an attachment in your email.

The manual is 6,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info