6618
9
Zoom out
Zoom in
Previous page
1/14
Next page
ENGLISH
6
SETUP
PLC SETTING
RECALIBRATION
If audio is lost when the ZC4001 and ZR6001 are
connected over a PLC connection, recalibrate the
signal to the best carrier frequency.
The ZR6001 is set first.
<ZR6001>
Using the OSD menu system, set MULTI PLC
SERVER to ON.
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
1.
Select 9. MULTI PLC in the SETUP MAIN
MENU with the
or cursor buttons, and
press the ENTER button.
2.
Select MULTI PLC SERVER with the or
cursor buttons. And select ON with the or
cursor buttons.
For details, see page 24 in the ZR6001 Users
Guide.
<ZC4001>
1.
Press and hold the ENTER button for 5 sec. or
more.
2.
Press the ENTER button.
3.
The below message appears when
recalibration is complete.
SET GROUP ID
To set a Group ID, connect the AC power cables of
the ZC4001 and ZR6001 to wall power outlets as
close to each other as possible.
Set the Group ID simultaneously for the ZC4001
and ZR6001.
<ZR6001>
Using the OSD menu system, set GP-ID
SETTING to START.
ZR6001 ON SCREEN DISPLAY MENU SYSTEMZR6001 ON SCREEN DISPLAY MENU SYSTEM
ZR6001 ON SCREEN DISPLAY MENU SYSTEMZR6001 ON SCREEN DISPLAY MENU SYSTEM
ZR6001 ON SCREEN DISPLAY MENU SYSTEM
1.
Select 9. MULTI PLC in the SETUP MAIN
MENU with the
or cursor buttons, and
press the ENTER button.
2.
Select GP-ID SETTING with the or
cursor buttons.
<ZC4001>
1.
Press and hold the ENTER button for 5 sec. or
more.
2.
Press the button once.
1. 2.
1
.
1. 3. 2.
1
.
3.
Simultaneously press the ENTER buttons of
the ZR6001 and ZC4001.
<ZR6001>
GP-ID SETTING : **
<ZC4001>
The below message appears when the Group ID
has been successfully set.
<ZC4001>
<ZR6001>
GP-ID SETTING : SUCCEED
The below message appears if the units fail to set
the Group ID.
<ZC4001>
<ZR6001>
GP-ID SETTING : MISSING
Notes:
One possible reason the Group ID cannot be set is
power line noise. In that case, unplug the power
cable of the device that is generating noise, then
plug it back in and try setting the Group ID again.
9MULTI PLC
MUL T I
CONNECT I ON MODE :
AUTO
H I GH AUD I O QUAL I TY
HIGH RELIABILITY
GP
ID SETTING:START
MA I N EX I T
PLC SERVER:ON
9MULTI PLC
MUL T I
CONNECT I ON MODE :
AUTO
H I GH AUD I O QUAL I TY
HIGH RELIABILITY
GP
ID SETTING:START
MA I N EX I T
PLC SERVER:ON
ZC4001U DFU_01_ENG 06.3.30, 9:10 AMPage 6 Adobe PageMaker 6.5J/PPC
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz ZC-4001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz ZC-4001 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info