161017
30
Zoom out
Zoom in
Previous page
1/35
Next page
26
ENGLISH
OTHER OPERATION
Use the TUNING/PRESET knob !4 or pressing the
CHANNEL/CONTROL button ⁄4 to select the last day.
Then press the TUNING/PRESET knob !4 or
ENTER button v.
10
.Set the On time.
q
Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
hour for the On time and press the TUNING/PRESET
knob !4 or ENTER button v.
w Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
minutes for the On time and press the
TUNING/PRESET knob !4 or ENTER button v.
11
.Set the Off time.
q Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
hour for the Off time and press the
TUNING/PRESET knob !4 or ENTER button v.
w Either turn the TUNING/PRESET knob !4 or press
the CHANNEL/CONTROL button ⁄4 to adjust the
minutes for the Off time.
12
.Set the timer program.
q Press the TUNING/PRESET knob !4 or ENTER
button v to decide the timer program setting.
Standby indicator lights up green and setting
contents are scrolled.
Note
Timer program can activate regardless of power on or
standby mode.
When timer program is finished, the unit goes to standby
mode.
When timer program is activated, standby indicator lights
green.
You can cancel the Timer program setting procedure at
any time by pressing the TIMER button ⁄7.
7
Confirm and change timer program
You can check and change the timer program setting as
follows.
1. Press the TIMER button ⁄7.
2. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select timer program
number.
3. You can change the displayed contents with the
TUNING/PRESET knob !4 or CHANNEL/CONTROL ⁄4
and ENTER buttons v if necessary.
Note
Timer program is not changed if you quit confirming
halfway through a procedure.
REMOTE CONTROLLER
RC7001ST
SHIFT
R
E
E
N
T
BAND MENU
TUNING
CONTROL
CHANNEL/
A/B C/D E/F
TIMER
10
DISPLAYDIMMER
987
456
32
T-MODEI/JG/H
SLEEP MEMO
ONSTANDBY
1
/A-TUNE
A-PRESET
⁄4
v
⁄7
PUSH ENTERPUSH ENTER
TUNING/PRESETTUNING/PRESET
STEREOSTEREO
RDSRDS
TUNEDTUNED
SECONDARYSECONDARY
BAND SELECTBAND SELECT
AUTO TUNEAUTO TUNE
MENUMENU
DISPLAYDISPLAY
DIMMERDIMMER
STANDBYSTANDBY
ON/STANDBYON/STANDBY
POWERPOWER
DAB/FM/AM TUNER ST7001DAB/FM/AM TUNER ST7001
!4
7
Timer program off
1. Press the TIMER button ⁄7, TIMER PROGRAM 1 is
displayed.
2. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select timer program
number.
3. Press the TUNING/PRESET knob !4 or ENTER button
v, TIMER PROGRAM x SET is displayed.
4. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select TIMER
PROGRAM x OFF.
5. Press the TUNING/PRESET knob !4 or ENTER button
v to turn off the timer program.
Note
To turn a timer program back on again, repeat this
procedure and select TIMER PROGRAM x ON.
ST7001N 01 Eng 05.7.21 5:24 PM ページ26
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz st7001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz st7001 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info