161017
14
Zoom out
Zoom in
Previous page
1/35
Next page
10
ENGLISH
7
Auto tuning (FM/AM)
1. Press the POWER ON/STANDBY switch q or ON
button , to turn on the power.
2. Watching the display, press the BAND button c to
select the desired band (AM or FM).
3. Press the MENU button u or ⁄2 to select menu.
4. Press the TUNING/PRESET knob !4 or ENTER button
v to set search mode.
5. Either turn the TUNING/PRESET knob !4 or press the
CHANNEL/CONTROL button ⁄4 to select Auto.
6. Press the TUNING/PRESET knob !4 or ENTER button
v to set the auto tuning mode.
7. Either turn the TUNING/PRESET knob !4 or press the
TUNING button ⁄1.
Automatic searching begins, then stops when a station
tuned in.
Note
When in the auto tuning mode on the FM band, the
STEREO indicator lights on the panel when the stereo
broadcast is tuned in. At open frequencies, the noise is
muted and the TUNED and STEREO indicators tuned off.
If the signal is weak, if may be difficult to tune into the
station in stereo. In such a case, press the T-MODE
button ⁄5 on the remote control. FM stereo broadcasts are
received in monaural and the stereo indicator is not
illuminated. To return to stereo mode, press the T-MODE
button ⁄5 on the remote control again.
If tuning does not stop at the desired station. Use Manual
tuning operation.
LISTENING TO FM/AM
7
FM Auto preset memory
1. Press the POWER ON/STANDBY switch q or ON
button , to turn on the power.
2. Watching the display, press the BAND button c to
select the FM band.
3. Press the A-PRESET/A-TUNE button b.
4. Press the ENTER button v.
The unit automatically begins searching for FM
broadcast stations.
When the first FM broadcast station is found, that
station is stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at
preset channels A1 to A10, B1 to B10, C1 to C10, D1 to
D10, E1 to E10, F1 to F10, G1 to G10, H1 to H10, I1 to
I10 and J1 to J10 for a maximum of 100 stations.
Channel A1 is tuned in after the auto preset memory
operation is completed.
Note
If an FM station cannot be preset automatically due to
poor reception, use the Manual tuning operation to tune
in the station, then preset it using the manual Preset
memory operation.
To interrupt this function, press the POWER ON/STANDBY
switch
q or STANDBY button z
.
Do not operate with the AUTO TUNE button i on the
front panel.
Perform this operation from the remote control unit.
7
DEFAULT VALUE
OPERATION
Auto tuner presets
A1 ~ A10
87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 / 90.1 /
90.1 / 90.1 / 90.1 MHz
B1 ~ B10
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C10 90.1 MHz
D1 ~ D10 90.1 MHz
E1 ~ E10 90.1 MHz
F1 ~ F10 90.1 MHz
G1 ~ G10 90.1 MHz
H1 ~ H10 90.1 MHz
I1 ~ I10 90.1 MHz
J1 ~ J10 90.1 MHz
ST7001N 01 Eng 05.7.21 5:24 PM ページ10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz st7001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz st7001 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info