161057
14
Zoom out
Zoom in
Previous page
1/17
Next page
10
ENGLISH
RDS DISPLAY
1. Select the FM band. RDS can be received only in FM.
2. Select the RDS broadcasting by using the TUNING 5∞
button i.
Then, RDS will light up in the upper side of the FTD
display. And the related data, if received, will be
displayed in the type of received data (PTY, RT, TP, TA)
3. RDS
1) The default of the RDS mode is PS.
2) Press the RDS button !6.
Each time you press the button briefly (1.5 second or
less), the modes will change as follows
PS
PTY
RT
TA
CT
PS
3) PS mode
When you select the PS with the RDS button !6, PS
will blink for about 4 seconds.
After 4 seconds, PS or a station name entered by
manual file will be displayed.
4) PTY mode
When you select the PTY with the RDS button !6,
PTY will blink for about 4 seconds, the type of
received PTY will be displayed.
If there is no PTY data among received broadcasting,
RDS mode will be switched to PS mode
automatically.
5) RT mode
When you select the RT with the RDS button !6, RT
will blink for about 4 seconds, After 4 seconds, the
data received broadcasting, the RDS mode will be
automatically switched to the PS mode.
6) TA mode (TP search function)
When you select the TA with the RDS button !6, TA
will blink for about 4 seconds, TP received
broadcasting will be searched with the FM frequency
increasing in 50 kHz steps.
If TP received broadcasting is searched, the increase
in frequency will be stop and it is asked whether TA
will be received or not.
If TP and TA turn off while you are receiving the TA,
the tuner will search the TA broadcasting again with
the FM frequency increasing in 50 kHz steps.
7) CT mode
When you select the CT with the RDS button !6, CT
will blink for about 4 seconds. After 4 seconds, the
clock time together with the frequency will be
displayed. CT can be received regardless of
whichever RDS mode. The tuner is set to.
* Not to use CT mode,
1. Press and hold the RDS button !6 for longer than 8
seconds, and press briefly the RDS button !6 within 0.5
seconds.
The indicator will be changed as follows:
PS
PTY
RT
TA
(NO CT)
PS
In this mode, although CT data are entered, the
time is not changed to the current time.
2. In NO CT mode, press and hold the RDS button !6 for
longer than 8 seconds.
The indicator will be changed as follows:
PS
PTY
RT
TA
CT
3. PTY Search
1) Press the RDS button !6 for longer then 1.5 second.
Then SEARCH will be shown in the display.
2) Select the desired PTY mode by using the PRESET
5∞ button !4.
3)
If you press the NEXT button !0, the PTY mode wills
blink in the clock display.
Searching will start when you push the TUNING 5∞
button i.
When the PTY mode that you have selected is
searched, searching will stop and the PTY mode will
be displayed.
If there is no program in the PTY mode, you have
selected, searching will stop at the frequency started.
OPERATIONS
ST6001N 01 Eng 06.10.23 4:24 PM ページ10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz st 6001 b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz st 6001 b in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info