161057
11
Zoom out
Zoom in
Previous page
1/17
Next page
7
ENGLISH
MEMORY PRESETTING
7
Manual operation
For example: presetting FM 90.1 MHz, to Preset number. 10
1. Select the FM by using the BAND button !7.
2. Tune to 90.1 MHz by using the TUNING 5∞ button i.
3. Press the MEMO button !1 briefly (for less than 0.5
second) Then, MEMO will blink in the display.
4. Select the preset number by using the PRESET 5∞
button !4.
5. MEMO button !1 pushed again, 90.1 MHz (broadcast
station) was able to be memorized in number 10 by this.
Note
Be sure to select the antenna A or B memorization when
you preset manual memory in FM broadcast.
7
Automatic operation
1. Select the desired broadcasting (FM, AM, or LW) by
using the BAND button !7.
2. Press the MEMO button !1 slightly longer than 1.5
second does.
Then, broadcasting will be automatically received, and
as many broadcasting station are received well will be
memorized preset number-01 after another.
3. Check the broadcasting station by using the PRESET
5∞ button !4.
Note
In the case of FM automatic presetting, the antenna A, B
selector is set to A automatically,
And the broadcasting station is scanned twice. The
stations that have stronger broadcasting signal are preset
in the first time.; weaker ones are preset in the second
time.
If a new broadcasting station is preset into a channel the
broadcasting station which has been preset into that
position area will be automatically erased.
In mountainous or remote area broadcasting stations
which have weak broadcasting signals cannot be
automatically preset into the memory.
Max. 30 broadcasting stations each for FM, AM(MW and
LW) bands can be preset.
LISTENING TO RADIO
1. Select FM, AM, or LW by using the BAND button !7.
2. Tune to the desired broadcast by using the TUNING i
or PRESET 5∞ button !4.
3. FM broadcasting is set up to STEREO mode
If the broadcasting signal is weak, or if there is a large
amount of interference in FM stereo broadcast, change
the monaural mode by presetting the FM MODE button
!5.
4. Select the IF BAND (FM bandwidth)
Select the NARROW bandwidth by pressing this button if
the broadcast signal is interfered with adjacent
broadcast in the FM .
FINE, MANUAL TUNING
This function used for selection the manual tuning of the fine
tuning mode.
Fine tuning mode is available only in the FM mode.
1. Press the TUNING MODE button u.
2. Every time you press this button, the following will be
displayed FINE MANUAL.
7
In FINE (Tuning) mode
When you try press the TUNING 5∞ button i, the
frequency will be selected by 10 kHz step to ±50 kHz.
Then, it will automatically be set to the MANUAL mode in 4
second.
7
In MANUAL (Tuning) mode
1. Press the TUNING 5∞ button i in the FM band, then
the frequency will be selected by 50 kHz step.
2. In the MW band, the frequency will be selected by 9 kHz
step.
3. In the LW band, the frequency will be selected by 1 kHz
step.
OPERATIONS
ST6001N 01 Eng 06.10.23 4:24 PM ページ7
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz st 6001 b at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz st 6001 b in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info