522827
81
Zoom out
Zoom in
Previous page
1/94
Next page
78
ENGLISH
MULTI ROOM
SYSTEM
The Multiroom System mode allows the same source
or different sources to be heard in two rooms other
than where this unit is installed.
To use the multiroom system, connect the audio from
the MULTI OUT A and B AUDIO output terminals to
the MULTI ROOM A and B amps.
Note:
The SR7002 does not have a MULTI ROOM B
setting.
Connect the VIDEO output (MULTI OUT) terminal to
the monitor in Room A.
(MULTI VIDEO OUT terminal is linked to the source
selector in Multi Room A.)
If a surround channel back speaker or speaker C
(see page 38) are not used in the room where this
unit is installed, the multi speaker system can be
used with the amp for the surround back channel.
Also, the COMPONENT VIDEO MONITOR OUT 2
terminal can be used for the monitor output of Room
A.
(This feature cannot be used with the SR7002.)
This unit supports multiroom system functions such
as source selectors, OSD menu systems, sleep
timers and remote control.
MULTI ROOM PLAYBACK USING THE MULTI
ROOM OUT TERMINALS
DIGITAL
LVIDEO
S-VIDEO
AUX 1 INPUT
VOLUME
DOWN
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR8002
M-DAX
ENTER
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND
SPEAKER
MULTI
DSD
POWER ON/OFF
L
C
R
SL S SR
LFE
DIGITAL
SURROUND
V-OFFDISP MULTI AUTO TUNED ST SPKR A B
NIGHT
PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR DIRECT
AUTO
DISC 6.1 MTX 6.1 EQ
PCM
AAC
2. 1.
1.
Pressing the MULTI button on the unit one
time accesses the MULTI ROOM A settings.
Pressing it two times accesses the MULTI
ROOM B settings. Then, pressing it a third time
turns the multiroom feature off. (The SR7002
does not have a MULTI ROOM B setting.)
2.
When the MULTI ROOM setting mode is
engaged, one of the following screens appears
on the display for 10 seconds.
– SR8002 –
* Display when MULTI ROOM A is selected
MA DVD -18dB
* Display when MULTI ROOM B is selected
MB DVD -18dB
– SR7002 –
SELECT SOURCE
3.
Select an input source with the INPUT
SELECTOR knob.
4.
Turn the VOLUME knob to set the volume of
the room used in the multi room system as you
like.
Note:
The sleep timer, monaural output and other features
can also be set using the MAIN MENU.
(See page 55)
MULTI ROOM PLAYBACK USING THE MULTI
SPEAKER TERMINALS
This unit allows you to connect another set of
speakers and place them in a different room or
separated area for Iistening to music.
DIGITAL
LVIDEO
S-VIDEO
AUX 1 INPUT
VOLUME
DOWN
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR8002
M-DAX
ENTER
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
PURE DIRECT
SURROUND
SPEAKER
MULTI
DSD
POWER ON/OFF
L
C
R
SL S SR
LFE
DIGITAL
SURROUND
V-OFFDISP MULTI AUTO TUNED ST SPKR A B
NIGHT
PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR DIRECT
AUTO
DISC 6.1 MTX 6.1 EQ
PCM
AAC
2. 1.
1.
Pressing the MULTI SPEAKER button on the
unit one time accesses the MULTI SPEAKER
A settings. Pressing it two times accesses the
MULTI SPEAKER B settings. Then, pressing it
a third time turns the MULTI SPEAKER feature
off.
(The SR7002 does not have a MULTI SPEAKER
B setting.)
2.
When the MULTI SPEAKER setting mode is
engaged, one of the following screens appears
on the display for 10 seconds.
– SR8002 –
* Display when MULTI SPEAKER A is selected
MSA DVD -18dB
* Display when MULTI SPEAKER B is selected
MSB DVD -18dB
– SR7002 –
M-ROOM SPKR
SELECT SOURCE
3.
Select an input source with the INPUT
SELECTOR knob.
4.
Turn the VOLUME knob to set the volume of
the room used in the multiroom system as you
like.
Note:
The sleep timer, monaural output and other features
can also be set using the MAIN MENU. (See page
55.)
Notes for Multi Room Speaker
• The Multiroom Speaker mode can be set for only
one of the rooms, A or B.
The MULTI ROOM SPEAKER output terminals can
be used when Surround Back Speaker = “NONE
in the SPEAKER SETUP menu. (See SPEAKER
SETUP, page 45)
• “The Surr. Back Speakers are in use” is displayed
when the MULTI SPEAKER button is pressed
when the Surround Back Speaker is not set to
NONE” in the SPEAKER SETUP menu. (See
SPEAKER SETUP, page 45)
The Multispeaker mode cannot be used at the
same time as the speaker C. When connecting for
multiroom use, set the SPEAKER C selector switch
on the rear panel to OFF.
SR7002-8002_U_01_ENG 3_3.indd 78SR7002-8002_U_01_ENG 3_3.indd 78 07.8.24 1:16:14 PM07.8.24 1:16:14 PM
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR8002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR8002 in the language / languages: English as an attachment in your email.

The manual is 15,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info