522827
15
Zoom out
Zoom in
Previous page
1/94
Next page
ENGLISH
12
LCD INDICATORS (RC8001SR)
Information about currently selected source and
direct code names are displayed on the LCD.
LEARN
NAME
MACRO
USE
PAG E
123
4
A
B
C
D
E
F
G
H
I
J
A Source Name indicator
This displays the name of the selected source, such
as DVD, television, or other AV equipment (up to fi ve
characters).
B Direct Button Name indicator
This displays up to 20 types of button names for each
source. (up to six characters)
C Page indicator
This displays the current page position.
D Transmission indicator
This indicator is displayed when the remote controller
is sending a signal.
E USE indicator
This indicator is displayed under normal operation.
F Battery Level indicator
This indicator is displayed when the battery level is
low.
G TIMER indicator
This indicator is displayed when the macro timer is
set.
(7) DISP. button
Selects the display mode for the front display of the
unit.
(8) OSD button
When this button is pressed, the current setting are
displayed on the TV monitor.
(9) SLEEP (sleep timer) button
This button is used for setting the sleep timer.
Each time this button is pressed, the sleep timer
is increased by 10 minutes, in a range of 10–120
minutes.
(0) THX button
Use this button to select the THX mode.
⁄2 MEMO button
This button is used to store settings to memory or
program a source.
⁄3 CONTROL button
Thses buttons are used when operating the PLAY,
STOP, PAUSE, and other commands of a source.
Note:
This button is unavailable for the unit.
⁄4 SOURCE button
Thses buttons are used to switch the source of your
A/V Receiver / amplifer. Each time a source button is
pressed, the remote controller changes to the source
which was pressed.
This remote controller can control 12 types of
equipment. To change the A/V Receiver / amplifi er
source, press this button twice within two seconds.
The signal is sent when it is pressed the second
time.
Note:
• Select the AMP as the source to use this remote
controller with the unit.
The MD button does not work with the unit.
⁄5 LIGHT 1 and 2 buttons
Pressing these buttons will light up the LCD and its
buttons. This lighting time can be set. If the lighting
time is set to 0 seconds, the backlight turns on only
while this button is pressed. The operations for
LIGHT 1 and 2 are identical.
⁄6 CLEAR button
This button is used to erase the memory or program
of a source.
⁄7 MENU button
(when AMP mode is selected)
This button is used to call up the SETUP MAIN
MENU of the unit.
⁄8 PREV (Previous) button
This button is used to return to the previous channel
on the television or other device.
Note:
This button is unavailable for the unit.
⁄9 CH (Channel) button
This is used to change channels.
¤0 CURSOR buttons
These buttons are used when controlling the cursor
of the unit, DVD, or other AV equipment.
¤1 LCD
Information about the sources and modes are shown
on the LCD.
H MACRO indicator
This indicator is displayed when the remote controller
is in macro programming mode.
I NAME indicator
This indicator is displayed when the remote controller
is in renaming mode.
J LEARN indicator
This indicator is displayed when the remote controller
is in learning mode.
SR7002-8002_U_01_ENG 1_3.indd 12SR7002-8002_U_01_ENG 1_3.indd 12 07.8.24 1:14:46 PM07.8.24 1:14:46 PM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR8002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR8002 in the language / languages: English as an attachment in your email.

The manual is 15,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info