Manual Marantz SR7400 (page 32 of 178) (English, French, Portuguese, Spanish)

6596

Zoom out

Zoom in

1/178

ENGLISH

(Using the remote control unit)

Tune into the radio station you desire (Refer to

the “MANUAL TUNING” or “AUTO TUNING”

section).

Press the MEMO button on the remote. “– –“

(preset number) starts blinking on the display.

Enter the desired preset number by pressing

the numeric buttons.

Note:

• When entering a single digit number (2 for

example), either input “02” or just input “2” and

wait for a few seconds.

RECALLING A PRESET STATION

(Using the SR7400)

Press the F/P button to show the preset

station on the display.

Select the desired preset station by pressing

the TUNING

or buttons on the front panel.

(Using the remote control unit)

ress the TUNER button twice within two

seconds on the remote.

Press the > button until PAGE4 is displayed

Press the P-SET+ (D4) or P-SET– (D5) button

to tune in the deseired preset station.

Or enter the preset station number with the

numeric buttons.

PRESET SCAN

(Using the remote control unit)

ress the TUNER button twice within two

seconds on the remote.

Press the > button until PAGE2 is displayed

and press the P-SCAN (D4) on the remote.

“PRESET SCAN” appears on the front display

and then the preset station with the lowest

preset number is recalled first.

Preset stations are recalled in sequence (No.1

→ No.2 → etc.) for 5 seconds each.

No stored preset number will be skipped.

You can fast forward the preset stations,

press the > button until PAGE4 is displayed

and press the P-SET+ (D4) continuously.

When the desired preset station is received,

cancel the preset scan operation by pressing the

CLEAR button or P-SCAN (D4) on the remote.

CLEARING STORED PRESET STATIONS

You can remove preset stations from the memory

using the following procedure.

Recall the preset number to be cleared with the

method described in “Recalling” a preset station.

Press the MEMORY button on the front panel or

press the MEMO button on the remote.

The stored preset number blinks in the display

for 5 seconds. While blinking, press the CLEAR

button on the front panel or the remote.

AV SURROUND RECEIVER SR7400

SELECTOR

VOLUME

DOWN

MEMORY

TUNING

MODE

CLEAR

MUTE

POWER ON/STANDBY

PHONES

ENTER

STANDBY

AUX1 INPUT

S-VIDEO VIDEO L AUDIO R

S-DIRECT

SELECT

DSS/VCR2

AUX1

VCR1

DVD

CD-R

TAPE

TUNER

7.1CH INPUT AUX2MULTI SPEAKERMULTISPEAKERS A/B

F/P

DIGITAL

2. 1.

TUNING

F/P

V SURROUND RECEIVER SR7400

MEMORY

TUNINGCLEAR

PHONES

ENTER

DSS/VCR2

AUX1

VCR1

DVD

CD-R

7.1CH MULTI SPEAKERMULTISPEAKERS A/B

2. 3.

MEMORY

CLEAR

“xx CLEAR” appears on the display to indicate that

the specified preset number has been cleared.

Notes:

• To clear all stored preset stations, press and hold

the CLEAR and the F/P buttons for two seconds.

SORTING PRESET STATIONS

If you have stations memorized, and there is a gap

in the sequential order:

I.e. the stations are stored as follows

1) 87.5 MHz

2) 93.1 MHz

3) 94.7 MHz

10) 105.9 MHz

(notice there is no stations programmed for pre

sets for 4-9), you can have pre set 10 become pre

set 5:

To sort the numbers, press and hold the MEMORY

and the F/P buttons.

“PRESET SORT” will appear on the display and

sorting will be done.

NAME INPUT OF THE PRESET STATION.

This function allows the name of each preset channel

to be entered using alphanumeric characters.

Before name inputting, you need to store preset

stations with the preset memory operation.

Recall the preset number to be inputted name

with the method described in “Recalling” a

preset station.

Press the MEMORY button on the front panel

or press the MEMO button on the remote for

more than 3 seconds.

The left most column of the station name

indicator flashes, indicating the character

entry ready status.

When the SELECT knob is turned, or

press

the > button until PAGE2 is displayed and

press the SCAN+ (D1) or SCAN– (D2) on the

remote

, alphabetic and numeric characters will

be displayed in the following order:

A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +

→ / → (Blank) → A

UP →

← DOWN

After selecting the first character to be entered,

press the MEMORY or ENTER buttons, press

the MEMO button on the remote.

The entry in this column is fixed and the next

column starts to flash. Fill the next column the

same way.

To move back and forth between the

characters, press the TUNING

/ buttons.

Or the CH+ or CH– on the remote.

Note:

• Unused columns should be filled by entering

blanks.

To save the name, press the MEMORY or the

ENTER button, press the MEMO button on

the remote for more than 2 seconds.

AV SURROUND RECEIVER SR7400

SELECTOR

VOLUME

DOWN

MEMORY

TUNING

MODE

CLEAR

MUTE

POWER ON/STANDBY

PHONES

ENTER

STANDBY

AUX1 INPUT

S-VIDEO VIDEO L AUDIO R

S-DIRECT

SELECT

DSS/VCR2

AUX1

VCR1

DVD

CD-R

TAPE

TUNER

7.1CH INPUT AUX2MULTI SPEAKERMULTISPEAKERS A/B

F/P

DIGITAL

MEMORY

F/P

AV SURROUND RECEIVER SR7400

SELECTOR

VOLUME

DOWN

MEMORY

TUNING

MODE

CLEAR

MUTE

POWER ON/STANDBY

PHONES

ENTER

STANDBY

AUX1 INPUT

S-VIDEO VIDEO L AUDIO R

S-DIRECT

SELECT

DSS/VCR2

AUX1

VCR1

DVD

CD-R

TAPE

TUNER

7.1CH INPUT AUX2MULTI SPEAKERMULTISPEAKERS A/B

F/P

DIGITAL

SELECTOR

MEMORY

TUNINGCLEAR

6.5. 6. 4.4.

Ten keypad Press, press again, press again, etc.

→

space

→

0 –

→

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

LIGHT

Learning Remote Controller

RC1400

TUNER

USE

PAGE

AMP

AUX2

AUX1

TAPE

TUNER

CD-R

LIGHT

Learning Remote Controller

RC1400

TUNER

USE

PAGE

5 64

MEMO

CLEAR

7.1CH

ATT

SPK-AB

DISP

OSD

SLEEP

CLEAR

USE

PAGE

2 31

5 64

CLEAR

DSS

VCRDVD

TEST

CH.SEL

SURR

7.1CH

ATT

SPK-AB

DISP

OSD

SLEEP

MEMO

CLEAR

MEMO

SOURCE

USE

PAGE

VOL

MUTE

MEMO

CLEAR

MEMO

SR7400U DFU_01_ENG 2_2 03.10.13, 9:25 AMPage 29 Adobe PageMaker 6.5J/PPC

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR7400 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 14,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR7400

Marantz SR7400 User Manual - English - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR7400 Manual

Product: