Manual Marantz SR7400 (page 21 of 52) (English)

6596

Zoom out

Zoom in

1/52

ENGLISH

1 INPUT SETUP (ASSIGNABLE DIGITAL

INPUT AND COMPONENT VIDEO INPUT)

Six digital inputs can be assigned to a desired

source.

Use this menu to select the digital input jack to be

assigned to the input source.

Select “INPUT SETUP” in SETUP MAIN

MENU with or cursor button, and press the

OK button.

To select the input source, press the or

cursor buttons.

To select the digital input jack, press the or

cursor buttons.

Select “Dx-AT” for input sources, for automatic

detection of the digital input signal condition.

If there is not a digital signal present, but there

is an analog signal present, the analog signal

will be played.

Select “Dig x”, when only a digital signal will be

used.

Select “ANA” for input sources for which

no digital input jacks are used.

To select the vdieo source, select “COMP1” or

“COMP2” by pressing the

or cursor buttons,

and press the

or cursor buttons to select the

vdieo source to be

assigned

After you complete this portion of the set up,

move the cursor to MAIN with the or cursor

buttons and press the OK button.

Notes:

• The TUNER and AUX2 are fixed to the analog

input, and cannot be selected for any digital input.

• When a DTS-LD or DTS-CD is playing, this setup

is not available. This is to avoid noise being

generated from the analog input.

• If “Dx-AT” is selected and a DVD, compact disc

or LD is fast-forwarded during playback, decoded

signals may produce a skipping sound. In such

cases, change the setting to DIGITAL.

2 SPEAKER SETUP

After you have installed the SR7400, connected all

the components, and determined the speaker

layout, it is now time to perform the settings in the

Speaker Setup menu for the optimum sound

acoustics for your environment and speaker layout.

Before you perform the following settings, it is

important that you first determine the following

characteristics:

2-1 SPEAKERS SIZE

When setting the speaker size in the SPEAKER

SIZE sub-menu, use the guidelines given below.

LARGE:

The complete frequency range for the channel

you are setting will be output from the speaker.

SMALL:

Frequencies of the channel you are setting lower

than approx. 100 Hz will be output from the

subwoofer.

If the Subwoofer is set to “NONE” and the front

speakers are set to “Large,” then the sound will

be output from both the left and right speakers.

Select “SPEAKER SETUP” in SETUP MAIN

MENU with

or cursor button, and press

the OK button.

To select the each speaker, press the or

cursor buttons.

To select the setting of each speaker size, press

the

or cursor buttons.

After you complete this portion of the set up,

move the cursor to “NEXT” with the

or cursor

buttons and then press the OK button to go to

the next page.

SUBWOOFER:

YES:

Select when a subwoofer is connected.

NONE:

Select when a subwoofer is not connected.

FRONT L/R

LARGE:

Select if the front speakers are large.

SMALL:

Select if the front speakers are small.

• If “NONE” is selected for the Subwoofer setting,

then this setting is fixed to “Large.”

CENTER

NONE:

Select if no center speaker is connected.

LARGE:

Select if the center speaker is large.

SMALL:

Select if the center speaker is small.

SURROUND L/R

NONE:

Select if no surround left and right speakers are

connected.

LARGE:

Select if the surround left and right speakers are

large.

SMALL:

Select if the surround left and right speakers are

small.

SURR. BACK

NONE: Select if no surround back left and right

speakers are connected.

2CH: Select if the surround back left and right

speakers are connected.

1CH: Select if the one surround back speaker is

connected.

In this case, the audio signal is emitted

form the Surround L output terminal.

Notes:

• If “None” is selected for the Surround L/R setting,

then this setting is fixed to “None.”

• You can use surround back speaker terminals as

multi room speaker terminals when you use no

surround back speaker. (See page 16)

SURR. BACK SIZE

LARGE:

Select if the surround back speaker is large.

SMALL:

Select if the surround back speaker is small.

Note:

• If “None” is selected for the Surround L/R setting,

then this setting is not available.

LPF/HPF

When you use a subwoofer, you can select the

cutoff frequency for the small speakers used. Select

one of the crossover frequency levels according to

the size of the small speaker connected.

80Hz :

Select this when the bass speaker is about 12 cm

(4 3/4 inches).

100Hz :

Select this when the bass speaker is about 10 cm

(3 15/16 inches).

120Hz :

Select this when the bass speaker is about 8 cm

(3 3/16 inches).

Notes:

•

Use the above comments as reference when adjusting.

• If S- Direct mode, 7.1CH Input is in use, this

function does not take effect.

BASS MIX

• The bass mix setting is only valid when “LARGE”

is set for the front speakers and “YES” is set for

the subwoofer during stereo playback .

•

When “BOTH” is selected, the low frequencies will

be played through the main L&R, as well as the

sub woofer.

In this playback mode, the low frequency range

expand more uniformly through the room, but

depending on the size and shape of the room,

interference may result in a decrease of the actual

volume of the low frequency range.

• By selecting “MIX”, the low frequencies will play

through the main L&R ONLY.

Note:

• LFE signals during playback of Dolby Digital or

DTS, will be played through the sub woofer.

1INPUTSETUP

CD :D6 - AT TV :D4 - AT

TAPE :ANA DVD :D5 -AT

CD-R :D1-AT VCR1 :ANA

DSS : D2 - AT

AUX 1 : D - AT

COMP 1 : DVD

COMP 2 : DSS

MA I N E X I T

2-1 SPEAKERS SIZE

SUBWOOFER : YES

FRONT L /R : LARGE

CENTER : SMALL

SURROUND L /R : SMALL

SURR.BACK : 2CH

SURR.BACK S I ZE : SMALL

LPF/HPF : 100 HZ

BASS M I X : BOTH

MA I N NE X T EX I T

SR7400U DFU_01_ENG 2_2 03.10.13, 9:25 AMPage 18 Adobe PageMaker 6.5J/PPC

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR7400 in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR7400

Marantz SR7400 User Manual - English, French, Portuguese, Spanish - 178 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR7400 Manual

Product: