62166
82
Zoom out
Zoom in
Previous page
1/94
Next page
79
ENGLISH
OPERATION OF THE MULTI ROOM OUTPUTS
WITH THE REMOTE CONTROL FROM MULTI A
Room A output can be operated from a room
where the unit (SR7002 or SR8002) is not installed.
This requires a separately sold IR receiver. (For
connections, see page 37.)
CHANGE THE MULTI ROOM CONTROL COMMANDS
(RC101) FOR MULTIROOM A
(When operating the unit by Multi Zone connected)
Zone A: MULTI ROOM A Control (Default)
Zone B: MULTI ROOM B Control
(The SR7002 does not use this zone.)
Change the control commands for each zone.
2.
1.
1. Press SET button and ZONE button until the
SEND indicator blinks twice.
Then backlight ashes.
2. Press A zone button.
When the procedure is successful, the SEND
indicator will blink twice.
These buttons change a special code of each zone.
POWER ON/OFF
SOURCE
VOL +/–
MUTE
Tuner mode operation remote code (Refer to page
26)
Notes for the Multi Room System
If the Tuner (FM or AM) is active in the main room,
you can not control any function of the tuner.In this
case, You must listen to the same station as the main
room.
OSD INFORMATION FOR THE MULTIROOM A SETUP
INFO
Press the INFO button to view the current setup as
shown below on a TV monitor connected to MULTI
VIDEO OUTPUT.
MULTI ROOM
VIDEO :DSS
AUDIO :DSS
SLEEP :90 min
MONO/ST:STEREO
OSD INFO:ENABLE
MULTI:ON MSPKR:OFF
VOL :VARI VOL :VARI
LEVEL:-20dB LEVEL:-90dB
--- MAIN ROOM STATUS ---
VIDEO:DVD AUDIO:DVD
OPERATION OF THE MULTI ROOM OUTPUTS
WITH THE REMOTE CONTROL FROM MULTI B
Room B output can be operated from a room
where the unit (SR7002 or SR8002) is not installed.
This requires a separately sold IR receiver. (For
connections, see page 37.)
Note:
The SR7002 does not use MULTIROOM B.
CHANGE THE MULTI ROOM CONTROL COMMANDS
(RC101) FOR MULTIROOM B
Change the control commands for each zone.
2.
1.
1. Press SET button and ZONE button until the
SEND indicator blinks twice.
Then backlight ashes.
2. Press B zone button.
When the procedure is successful, the SEND
indicator will blink twice.
These buttons change a special code of each zone.
POWER ON/OFF
SOURCE
VOL +/–
MUTE
Tuner mode operation remote code (Refer to page
26)
Notes for the Multi Room System
If the Tuner (FM or AM) is active in the main room,
you can not control any function of the tuner.In this
case, You must listen to the same station as the main
room.
OPERATION OF THE MULTI SPEAKER
OUTPUTS WITH THE REMOTE CONTROL
To switch to MULTI SPEAKER SYSTEM (A or B)
control, perform the following operations with the
RC101 set to MULTI ROOM A or MULTI ROOM B.
1.
2.
1.
3.
1. Press SET button and POWER ON button until
the SEND indicator blinks twice.
Then backlight ashes.
2. Press the DVD button.
Note
Press the TV button at this time to return to the MULTI
ROOM settings.
3. Press ENTER button once to lock in the code.
When the procedure is successful, the SEND
indicator will blink twice.
SR7002-8002_U_01_ENG 3_3.indd 79SR7002-8002_U_01_ENG 3_3.indd 79 07.8.24 1:16:14 PM07.8.24 1:16:14 PM
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR7002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR7002 in the language / languages: English as an attachment in your email.

The manual is 15,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR7002

Marantz SR7002 User Manual - Dutch - 74 pages

Marantz SR7002 User Manual - French - 84 pages

Marantz SR7002 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info