Manual Marantz SR7002 (page 66 of 94) (English)

62166

Zoom out

Zoom in

1/94

ENGLISH

STEREO

This mode bypasses all surround processing.

In stereo program sources, the left and right channels

play normally when PCM audio or analog stereo is

input.

With Dolby Digital and DTS sources, the 5.1 channels

are converted to two channel stereo. 96 kHz PCM

source material can be played back in stereo mode.

Dolby Virtual Speaker

Dolby Virtual Speaker technology uses proprietary

technology of Dolby Laboratories to create a virtual

surround sound ﬁ eld using only two speakers for the

front channels, allowing the user to experience sound

as if surround speakers were actually being used.

MULTI CH. (MOVIE, MUSIC)

This mode is used to create a wider, deeper and more

natural soundstage from two channel source material.

This is done by feeding the left channel signal to

both the left front and left surround speakers and the

right channel signal to both the right front and right

surround speakers. Additionally, the center channel

reproduces a mix of the right and left channels.

Note:

• Audio is not output from the CENTER channel

when using MULTI CH. MUSIC mode.

THX CINEMA

THX Cinema mode applies additional processing

to Dolby Digital, DTS and Dolby Pro Logic multi-

channel, surround sources. The THX processing

was developed by THX Ltd. to recreate the sound of

top-quality theater.

Use the THX Cinema mode for all movies on disc,

tape or broadcast. In this mode, the THX Surround

EX mode is not available.

THX SURROUND EX

In a movie theater, ﬁ lm soundtracks that have been

encoded with Dolby Digital Surround EX technology

are able to reproduce an extra channel which has

been added during the mixing of the program.

This channel, called Surround Back, places sounds

behind the listener in addition to the currently

available front left, front center, front right, surround

right, surround left and subwoofer channels.

This additional channel provides the opportunity

for more detailed imaging behind the listener and

brings more depth, spacious ambience and sound

localization than ever before.

THX Surround EX will operate for any 5.1 channel

source whenever THX is active.

THX Surround EX is not available in system without

surround back speaker(s).

Note:

• When playing Dolby Digital Surround EX-encoded

software in 6.1 channels, it is required to select the

THX Surround EX mode.

THX SELECT2 CINEMA

THX SELECT2 Cinema mode plays 5.1 movies using

all 7.1 speakers giving you the best possible movie

watching experience. In this mode, ASA processing

blends the surround L/R speakers and surround back

speakers, providing the optimal mix of ambient and

directional surround sound.

This mode permits the playback of a non Surround

EX/ES-encoded 5.1 movie over a 7.1 system.

DTS-ES (Matrix and 6.1 Discrete) and Dolby

Digital Surround EX-encoded soundtracks will be

automatically detected, if the appropriate ﬂ ag has

been encoded.

Some Dolby Digital Surround EX soundtracks

are missing the digital ﬂ ag that allows automatic

switching.

If you know that the movie that you are watching is

encoded in Surround EX, you can manually select the

THX Surround EX playback mode, otherwise the THX

SELECT2 Cinema mode will apply ASA processing to

provide optimum replay.

THX MUSIC

For the replay of multichannel music, the THX Music

mode should be selected. In this mode, THX ASA

processing is applied to the surround channels of all

5.1-encoded music sources, such as DTS and Dolby

Digital, to provide a wide, stable, rear soundstage.

This mode is to be used with multichannel music

sources such as DTS 5.1 music and Dolby Digital

5.1 music.

Notes:

• These modes are only available when you have

setup SPEAKER SIZE menu system (i.e. 2 surround

back speakers).

• These modes are only available when the input

signal has surround left and surround right contents.

THX GAMES

For the replay of stereo and multichannel game

audio the THX Games mode should be selected.

In this mode, THX ASA processing is applied to

the surround channels of all 5.1 and 2.0-encoded

game sources such as analog, PCM, DTS and

Dolby Digital. This accurately places all game audio

surround information, providing a full 360-degree

playback environment. THX Games mode is unique

as it gives you a smooth transition of audio in all

points of the surround ﬁ eld.

Neural Surround

represents the latest advancement

in surround technology developed for music.

Neural Surround

employs psychoacoustic

frequency domain processing which allows delivery

of a more detailed sound stage with superior channel

separation and localization of audio elements.

System playback is scalable from 5.1 to 7.1 multi-

channel surround playback.

This is the optimum mode for playing sources

recorded in XM HD Surround. (See page 77)

CAUTION

Note for DTS

•

To connected DVD player, laserdisc player or CD

player needs to support DTS digital output. You

may not be able to play some DTS source signals

from certain CD players and LD players even if

you connect the player to the unit digitally. This is

because the digital signal has been processed

(such as the output level, sampling frequency or

frequency response), and the unit cannot recognize

the signal as DTS data.

• Depending on the player used, DTS play may

produce a short noise. This is not a malfunction.

• While signals from a DTS laserdisc or CD are

playing in another surround mode, you cannot

switch to digital input or from digital input to analog

input from the INPUT SETUP in the MAIN MENU

or by pressing the A/D button.

• You can not listen to DTS-encoded software in a

multiroom.

•

The outputs for VCR 1 OUT, DSS/VCR 2 OUT,

TAPE OUT and CD-R OUT output analog audio

signals only. Do not record from CDs or LDs that

support DTS using these outputs. If you do, the

DTS-encoded signal will be recorded as noise.

Note or Dolby Digital Surround EX

•

When playing Dolby Digital Surround EX-encoded

software in 6.1 channels, it is required to set the

EX/ES mode.

• Note that some Dolby Digital Surround EX-encoded

software does not contain the identiﬁ cation signal.

In this case, set the EX/ES mode manually.

Note for 96 kHz/192 kHz PCM audio

•

The AUTO, Pure Direct, and Stereo modes can be

used when playing PCM signals with a sampling

frequency of 96/192 kHz (such as from DVD-Video/

Audio discs).

•

Certain DVD player models inhibit digital output. For

details, refer to the player’s operation manual.

•

Some DVD discs feature copy protection. When using

such disc, 96 kHz PCM signal are not output from the

DVD player. For details, refer to the player’s operation

manual.

Note for HDCD

•

HDCD is effective only through digital input.

•

You may not be able to play some HDCD source

signals from certain CD players if you connect the

player to the unit digitally. This is because the digital

signal has been processed (such as the output level,

sampling frequency or frequency response) and the

unit cannot recognize the signal as HDCD data.

SR7002-8002_U_01_ENG 3_3.indd 63SR7002-8002_U_01_ENG 3_3.indd 63 07.8.24 1:16:04 PM07.8.24 1:16:04 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR7002 in the language / languages: English as an attachment in your email.

The manual is 15,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR7002

Marantz SR7002 User Manual - Dutch - 74 pages

Marantz SR7002 User Manual - French - 84 pages

Marantz SR7002 User Manual - Spanish - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR7002 Manual

Product: