61897
72
Zoom out
Zoom in
Previous page
1/90
Next page
69
ENGLISH
BASIC
CONNECTIONS
BASIC OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
ADVANCED
OPERATION
CHECKING THE CODE
1
.
2
.
4
.
3
.
1
.
1.
Press and hold down the SOURCE button for
appliance which should be controlled and press
SET button until the indicator blinking twice then
back light fl ushes.
2.
Press the INFO button.
The indicator will blink twice.
3.
To setup code for all digits is displayed on the
LCD in 3 seconds.
RESETTING THE CODE
1
.
1
.
2
.
1.
Press and hold down the SOURCE button
for appliance which should be controlled and
press SET button until the indicator blinking
twice.
Then back light fl ushes.
2.
Press the below codes to reset.
TV : 1000
DVD : 2000
CD : 3000
DSS : 4000
Note:
After this procedure, the selected SOURCE button is
set initial code.
LEARN MODE
This remote controller is capable of learning and
storing codes used by other remote controls that you
already own.
For codes which are not learned, the remote
controller will transmit either the Marantz preset
codes from the initial settings, or remote codes from
another manufacturer’s AV equipment which is set
by the customer.
The receiver sensor for the remote controller signals is
located at the top of the remote controller.
Notes:
• This remote controller is capable to learn around 120
codes.
• When the batteries are getting weak , the learning
procedure is not successful.
LEARNING PROCEDURE
1.
Place the remote controller so that its infrared
signal transmitter is facing the infrared signal
receiver on the Marantz remote controller at a
distance of about 0.05 m (2 inches).
0.05 m
2.
Press and hold down the SET and SETUP
buttons until LEARN indicator blinks.
3.
Select the SOURCE button to select the
SOURCE, the SOURCE name is displayed on
the LCD.
4.
Select the button to be learned.
LEARN indicator stop to blink.
Notes:
The learning function is unavailable for all SOURCE
buttons and HDMI button in any mode.
The learning function is unavailable for all buttons
in TUNER mode and AMP mode.
5.
Press and hold the button of the original remote
controller to learn until “OK” is displayed on the
LCD.
When “NG” is displayed on the LCD, repeat
this step.
When the memory of the remote controller
is full, “FULL” is displayed on the LCD. If you
want to learn the code, you should erase
other learned button.
6.
Repeat steps
4
and
5
to learn other buttons in
same SOURCE.
7.
Repeat steps
3
to
6
to learn other SOURCE.
8.
When you have finished programming the
remote controller, press the SET button, then
LEARN indicator stops blinking and exits from
the LEARN mode.
Notes:
• When “NG” is displayed on the LCD once again,
the transmitting code is unavailable for remote
controller, or the transmitting signal is intercepted
by noise.
If no buttons are pressed for approximately 1 minute
while in the LEARN mode, the remote controller
automatically exits from the LEARN mode.
SR6003_U_01_ENG 3_4.indd 69SR6003_U_01_ENG 3_4.indd 69 08.8.1 1:08:12 PM08.8.1 1:08:12 PM
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR6003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR6003 in the language / languages: English as an attachment in your email.

The manual is 17,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR6003

Marantz SR6003 User Manual - Dutch - 73 pages

Marantz SR6003 User Manual - Spanish - 84 pages

Marantz SR6003 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info