Manual Marantz SR6003 (page 55 of 90) (English)

61897

Zoom out

Zoom in

1/90

ENGLISH

BASIC

CONNECTIONS

BASIC OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERS

NAMES AND

FUNCTION

ADVANCED

OPERATION

After selecting the ﬁ rst character to be entered,

press the MEMORY or ENTER button, or press

the MEMO button on the remote controller.

The entry in this column is ﬁ xed and the next

column starts to ﬂ ash. Fill the next column the

same way.

To move back and forth between the characters,

press the 1 / 2 cursor buttons.

Note:

• Unused columns should be filled by entering

blanks.

To save the name, press the MEMORY or

ENTER button on the front panel, or press the

MEMO button on the remote controller for more

than 2 seconds.

Instead of using the 3 and 4 cursor buttons to

select characters, characters can be input from

the numeric keys of the remote controller. See

the below table for a correspondence between

characters and numeric keys.

Ten keypad Press, press again, press again, etc.

A → B → C → 1 → A

D → E → F → 2 → D

G → H → I → 3 → G

J → K → L → 4 → J

M → N → O → 5 → M

P → Q → R → 6 → P

S → T → U → 7 → S

V → W → X → 8 → V

Y → Z → space → 9 → Y

– → + → / → 0 → –

NAME INPUT OF THE PRESET STATION.

This function allows the name of each preset channel

to be entered using alphanumeric characters.

Before name inputting, you need to store preset

stations with the preset memory operation.

5. 2.

Recall the preset number to be inputted name

with the method described in “Recalling” a

preset station.

Press the MEMORY button on the front panel

or press the MEMO button on the remote

controller for more than 3 seconds.

The left most column of the station name

indicator ﬂ ashes, indicating the character entry

ready status.

When you press the 3 or 4 cursor buttons

on the front panel or the remote controller,

alphabetic and numeric characters will be

displayed in the following order:

A ↔ B ↔ C ... Z ↔ 1 ↔ 2 ↔ 3 ..... 0 ↔ – ↔ +

↔ / ↔ (Blank) ↔ A

UP →

← DOWN

SORTING PRESET STATIONS

If you have stations memorized, and there is a gap in

the sequential order:

I.e. the stations are stored as follows

1) 87.1 MHz

2) 93.1 MHz

3) 94.7 MHz

10) 105.9 MHz

(notice there is no stations programmed for presets

for 4-9), you can have preset 10 become preset 4:

To sort the numbers, press and hold the MEMORY

and the 4 cursor buttons.

“PRESET SORT” will appear on the display and

sorting will be done.

CLEARING STORED PRESET STATIONS

You can remove preset stations from the memory

using the following procedure.

3.2.

Recall the preset number to be cleared with

the method described in “Recalling” a preset

station.

Press the MEMORY button on the front panel

or press the MEMO button on the remote

controller.

The stored preset number blinks in the display

for 5 seconds. While blinking, press the CLEAR

button on the front panel or the CL button on the

remote controller.

“xx CLEAR” appears on the display to indicate

that the specified preset number has been

cleared.

Note:

•

To clear all stored preset stations, press and hold the

T-MODE and the ENTER buttons for two seconds.

SR6003_U_01_ENG 3_4.indd 52SR6003_U_01_ENG 3_4.indd 52 08.8.1 1:08:06 PM08.8.1 1:08:06 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR6003 in the language / languages: English as an attachment in your email.

The manual is 17,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR6003

Marantz SR6003 User Manual - Dutch - 73 pages

Marantz SR6003 User Manual - Spanish - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR6003 Manual

Product: