61897
19
Zoom out
Zoom in
Previous page
1/90
Next page
ENGLISH
16
BASIC
CONNECTIONS
BASIC OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
BASIC OPERATION
BASIC OPERATION
AMP OPERATION
TURNING ON THE UNIT
1.
Connect the AC power cable to the wall outlet.
2.
Turn the power of the equipment connected to
this unit on.
3.
Press the POWER ON/STANDBY button of
this unit. Every time the button is pressed,
the power to this unit toggles between on and
standby.
To activate power using the remote controller,
press the AMP button, followed by the ON
button and SOURCE ON/OFF button of the
remote controller.
SELECTING AN INPUT SOURCE
Before you can listen to any input media, you must
rst select the input source on the unit.
Example : DVD
To select DVD, turn the INPUT SELECTOR knob
on the front panel or press the DVD button on the
remote controller two times in a row. After you have
selected DVD, simply turn on the DVD player and
play the DVD.
As the input source is changed, the new input
name will appear momentarily an OSD information
on the video display. The input name will also
appear in the display, on the front-panel.
If you use the FUNCTION RENAME feature (see
page 28) , the renamed name appears on the
display.
As the input is changed, this unit will automatically
switch to the digital input, surround mode,
attenuation, and night mode status which were
entered during the confi guration process for that
source.
When a video source is selected, the selected
video signal is output from the MONITOR OUT
terminal.
ADJUSTING THE MAIN VOLUME
Adjust the volume to a comfortable level using
the VOLUME control knob on the front panel or
VOLUME + / buttons on the remote controller.
To increase the volume, turn the VOLUME knob
clockwise or press VOLUME + button on the
remote controller, to decrease the volume, turn
counterclockwise or press VOLUME button on the
remote controller.
Notes:
The volume can be adjusted within the range of –
and –71 to 18 dB, in steps of 1 dB.
However, when the channel level is set as described on
page 34, if the volume for any channel is set at +1 dB
or greater, the volume cannot be adjusted up to 18 dB.
(In this case the maximum volume adjustment range
is “18 dB - Maximum value of channel level)
ADJUSTING THE TONE (BASS & TREBLE)
CONTROL
During a listening session you may wish to adjust the
Bass and Treble Control to suit your listening tastes
or room acoustics.
(Using the remote controller)
To
adjust the tone
, press the AMP button.
To adjust the bass effect, press BASS + or BASS
button
.
To adjust the treble effect, TREBLE + or TREBLE
button
.
Notes:
The tone control function is unavailable for the
Source Direct, Pure Direct, Headphone, Dolby
Virtual Speaker mode, and 176.4/192kHz PCM.
The Tone control function is not available when M-
DAX is being used.
The tone control function is not available when
ACOUSTIC EQ is being used.
• Additionally, tone control is not available during
Dolby TrueHD, Dolby Digital Plus, or DTS-HD
playback.
TEMPORARILY TURNING OFF THE SOUND
To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the remote controller.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording or
dubbing that may be in progress.
When the system is muted, the display will show
MUTE” .
Press the MUTE button again to return to normal
operation.
TUNER OPERATION
To operate the unit from the remote controller, press
the TUNE button on the remote controller so that the
tuner mode is engaged.
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country’s
standard is 9 kHz step, Press BAND button on the
front panel or BAND button on the remote controller
more than 5 seconds. Scan step will change.
Note:
Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
1. 2.3.
1
.
3
.
2
.
(Using the unit)
1.
Turn the INPUT SELECTOR knob to select
TUNER”.
2.
Press the BAND button to select either FM or
AM.
3.
Press the 3 or 4 cursor buttons on the front
Panel for more than 1 second to start the auto
tuning function.
4.
Automatic searching begins then stops when a
station is tuned in.
SR6003_U_01_ENG 1_4.indd 16SR6003_U_01_ENG 1_4.indd 16 08.8.1 1:06:34 PM08.8.1 1:06:34 PM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR6003 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR6003 in the language / languages: English as an attachment in your email.

The manual is 17,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR6003

Marantz SR6003 User Manual - Dutch - 73 pages

Marantz SR6003 User Manual - Spanish - 84 pages

Marantz SR6003 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info