62526
41
Zoom out
Zoom in
Previous page
1/68
Next page
ENGLISH
37
SUB W LEVEL:
Set the effect level of the subwoofer speaker
between –18 and +12 level in 0.5 level interval .
• If NONE” was selected for the subwoofer speaker
setting in the SPEAKER SIZE, then this setting will
not appear.
Note:
Setting to a mode other than multichannel stereo or
CSII will affect the speaker level as explained in “2-2
MANUAL SETUP”.
After you complete this portion of the setup, move the
cursor to “RETURN with the 3, 4, 1 and 2 cursor
buttons and press the ENTER button to go to the 3.
SURR SETUP menu.
3-4 NEO:6 PARAMETER
The DTS NEO:6 mode enables a maximum 6.1
channel output with just 2 channel input. (It also
supports 5.1 channel input.)
This mode expands the sound image from the center
channel.
1.
Select 3. SURROUND SETUP” from MAIN
MENU with the 3
or
4 cursor buttons and press
the ENTER button.
2.
Select NEO:6 PARAMETER with the 3
or
4
cursor buttons.
3.
Press the ENTER button to enter the
selection.
NEO:6 PARAMETER
CENTER GAIN : 0.3
RETURN NEXT EXIT
4.
Set the CENTER GAIN level between 0.0 and
1.0 in 0.1 level
increments
with the 1
or
2 cursor
buttons.
After you complete this portion of the setup, move
cursor to “RETURN with the 3, 4, 1 and 2 cursor
buttons and press the ENTER button.
Notes:
This parameter can only be set in the NEO:6-Music
mode.
• IfNONE” was selected for the center speaker
setting in the SPEAKER SIZE menu, this setting is
disabled.
3-2 PL
II
x (PRO LOGIC
II
x) MUSIC PARAMETER
Pro LogicIIx-Music mode creates a rich and
enveloping surround ambience from stereo sources
such as CDs.
In this mode, the SR6001 includes three controls to
ne-tune the sound fi eld as follows.
1.
Select 3. SURR SETUP” in MAIN MENU with
3
or
4 cursor buttons and press the ENTER
button.
2.
Select PL
II
x MUSIC PARAMETER” with the 3
or
4 cursor buttons.
3.
Press the ENTER button to enter the
selection.
PL x MUSIC PARAMETER
PARAMETER :DEFAULT
PANORAMA :OFF
DIMENSION : 0
CENTER WIDTH: 3
RETURN NEXT EXIT
PARAMETER:
Select “DEFAULT” orCUSTOM with the 1 or 2
cursor buttons.
If you select CUSTOM”, you can adjust three
parameters as listed below.
PANORAMA:
Select the PANORAMA mode “ON or OFF” with
the 1 or 2 cursor buttons.
Panorama wraps the sound of the front left and right
speakers around you, for an exciting perspective.
DIMENSION:
Set the DIMENSION level between 0 and 6 level in
1 level intervals with the 1 or 2 cursor buttons.
Adjust the sound fi eld either towards the front or
towards the rear.
This can be useful to help achieve a more
suitable balance from all the speakers with certain
recordings.
CENTER WIDTH:
Set the CENTER WIDTH level between 0 and 7 in
1 level intervals with the 1 or 2 cursor buttons.
Center width allows you to gradually spread the
center channel sound into the front left and right
speakers.
At its widest setting, all the sound from the center
is mixed into the left and right speakers.
This control may help achieve a more spacious
sound or a better blend for the front image.
If “NONE was selected for the center speaker
setting in the SPEAKER SIZE menu, this setting
cannot be selected.
After you complete this portion of the setup, move
cursor to “RETURN with the 3, 4, 1 and 2 cursor
buttons and press the ENTER button.
3-3 CS
II
PARAMETER
1.
Select 3. SURROUND SETUP” from MAIN
MENU with the 3
or
4 cursor buttons and press
the ENTER button.
2.
Select CS
II
PARAMETER” with the 3
or
4
cursor buttons.
3.
Press the ENTER button to enter the
selection.
CS PARAMETER
TRUBASS : 0
SRS DIALOG : 0
RETURN NEXT EXIT
TRUBASS:
Set the TRUBASS level between 0 and 6 in 1- level
increments with the
1 or 2
cursor buttons.
TRUBASS produced by the speakers are an octave
below the actual physical capabilities of the speakers
adding exciting, deeper bass effects.
SRS DIALOG:
Set the SRS DIALOG level between
0 and 6
in 1-
increments
with the 1 or 2 cursor buttons.
This can be popped out of the surround audio
effects, allowing the listener to easily discern what
the actors say.
If “NONE was selected for the center speaker
setting in the SPEAKER SIZE menu, this setting
cannot be selected.
After you complete this portion of the setup, move
cursor to “RETURN with the 3, 4, 1 and 2 cursor
buttons and press the ENTER button.
Note:
This parameter can only be set in the CSII mode.
SR6001N DFU_1_ENG 2_4.indd 37SR6001N DFU_1_ENG 2_4.indd 37 06.12.21 3:10:58 PM06.12.21 3:10:58 PM
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR6001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR6001 in the language / languages: English as an attachment in your email.

The manual is 5,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info