522801
72
Zoom out
Zoom in
Previous page
1/96
Next page
NAMES AND
FUNCTIONS
70
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
ADVANCED
OPERATION
ENGLISH
CHECKING THE CODE
1.
2.
3.
4.
1.
1. Press and hold down the SOURCE button
for appliance which should be controlled
and press SET button until the indicator
blinking twice then back light fl ushes.
2. Press the INFO button.
The indicator will blink twice.
3. To setup code for all digits is displayed on
the LCD in 3 seconds.
RESETTING THE CODE
1.
1.
2.
1. Press and hold down the SOURCE button
for appliance which should be controlled
and press SET button until the indicator
blinking twice.
Then back light fl ushes.
2. Press the below codes to reset.
TV : 1000
DVD : 2000
CD : 3000
DSS : 4000
BD : 5000
Note
After this procedure, the selected SOURCE button
is set initial code.
LEARN MODE
This remote controller is capable of learning and
storing codes used by other remote controls that
you already own.
For codes which are not learned, the remote
controller will transmit either the Marantz preset
codes from the initial settings, or remote codes
from another manufacturer’s AV equipment which
is set by the customer.
The receiver sensor for the remote controller signals
is located at the top of the remote controller.
Notes
This remote controller is capable to learn around
160 codes.
When the batteries are getting weak , the learning
procedure is not successful.
LEARNING PROCEDURE
1. Place the remote controller so that its
infrared signal transmitter is facing the
infrared signal receiver on the Marantz
remote controller at a distance of about 5
cm (2 inches).
5 cm
2. Press and hold down the SET and SETUP
buttons until LEARN indicator blinks.
3. Select the SOURCE button to select the
SOURCE, the SOURCE name is displayed
on the LCD.
4. Select the button to be learned.
LEARN indicator stop to blink.
Notes
The learning function is unavailable for all
SOURCE buttons and HDMI button in any
mode.
The learning function is unavailable for all
buttons in TUNER mode, USB mode, M-XP mode
and AMP mode.
5. Press and hold the button of the original
remote controller to learn until “OK” is
displayed on the LCD.
When “NG” is displayed on the LCD,
repeat this step.
When the memory of the remote
controller is full, “FULL” is displayed on
the LCD. If you want to learn the code,
you should erase other learned button.
6. Repeat steps 4 and 5 to learn other buttons
in same SOURCE.
7. Repeat steps 3 to 6 to learn other
SOURCE.
ADVANCED OPERATION
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR5004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR5004 in the language / languages: English as an attachment in your email.

The manual is 21,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info