522801

Marantz SR5004 Manual

40
Zoom out
Zoom in
Previous page
1/96
Next page
NAMES AND
FUNCTIONS
38
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERSSETUP
ENGLISH
SETUP
6 ACOUSTIC EQ
This display is for setting up the equalizer and
changing the Equalizer mode.
1. Select “Acoustic EQ” from Main Menu with
the 3 or 4 cursor buttons and press the
ENTER button.
2. Select the desired menu with the 3 or
4 cursor buttons and press the ENTER
button.
After you complete this portion of the setup, move
the cursor to “RETURN” with the 3 or 4 cursor
buttons and press the ENTER button.
• EQ Mode:
There are 4 equalizer modes to choose from: Preset
Graphic EQ that allows the user to manually adjust
the equalizer, and Audyssey
TM
, Audyssey Front and
Audyssey Flat that automatically adjust the equalizer
from the measurement results of the Auto Setup
feature (see page 28).
Audyssey Front:
Front L/R channels have no EQ correction applied
while all other channels use the standard Audyssey
mode for EQ correction.
Audyssey Flat:
This mode fl attens the frequency characteristics of
all speakers. It is suited for playback of multichannel
music such as Dolby Digital and DTS.
Audyssey:
This mode adjusts the frequency characteristics
of all speakers so as to create the best listening
environment for the sound characteristics of the
listening room.
User:
This mode adjusts the graphic equalizer that was
set in Adjust User EQ to adjust the characteristics
of each speaker (see page 39).
Off:
The graphic equalizer is not used.
To use the remote controller to change the EQ
Mode, press the AMP button and press the EQ
button.
Each time this button is pressed, the EQ Mode
changes as follows.
Off Audyssey Front
Audyssey Fla
t
User Audyssey
Notes
• “Audyssey Front”, “Audyssey Flat” and
“Audyssey” can be selected after executing the
Auto Setup feature.
• If a speaker that was determined “No” in Auto
Setup is manually turned on, the “Audyssey”,
“Audyssey Front” and “Audyssey Flat” modes
cannot be selected.
•
If, after auto setup was performed, changes were made
to the settings, such as the speaker confi guration and
distance, channel levels and crossover frequencies,
without increasing the number of speakers whose
characteristics were measured, “*” will be displayed
for the name of the mode.
Example: “Audyssey Flat*”
• The equalizer turns off when the Pure Direct
mode, Source Direct mode, Dolby Headphone or
Virtual mode is set.
• Acoustic EQ Modes are not used during playback
of Dolby TrueHD, Dolby Digital Plus, or DTS-
HD signals.
Even in this case, settings made using Speaker
Auto Setup (speaker yes/no, distance, size,
channel level, crossover) are enabled.
• Tone Control is disabled when an EQ Mode is in
use.
• Adjust User EQ :
“6-1 ADJUST USER EQ” (see page 39)
• Check Audyssey MultEQ
®
:
“6-2 CHECK AUDYSSEY MULTEQ” (see page 39)
• Audyssey Dynamic EQ
TM
:
Audyssey Dynamic EQ solves the problem of
deteriorating sound quality as volume is decreased
by taking into account human perception and room
acoustics. Audyssey Dynamic EQ works in tandem
with Audyssey MultEQ to provide well-balanced
sound for every listener at any volume level.
Select “On” or “Off” with the 1 or 2 cursor
buttons.
• Audyssey Dynamic EQ
TM
Adjust :
Audyssey Dynamic EQ is referenced to the standard
fi lm mix level of 85 dB SPL for -20 dBFS. Due to
the lack of standards outside the fi lm industry, the
fi lm reference level may not be appropriate when
listening to other material.
Audyssey Dynamic EQ Adjust provides three offsets
from the fi lm level reference (5 dB, 10 dB, and 15
dB) that can be selected when the mix level of the
content is not within the standard.
0 dB (Film Ref):
This is the default setting and should be used when
listening to movies.
5 dB:
Select this setting for content that has a very wide
dynamic range, such as classical music.
10 dB:
Select this setting for jazz or other music that has a
wider dynamic range.
This setting should also be selected for TV content
as that is usually mixed at 10 dB below film
referencce.
15 dB:
Select this setting for pop/rock music or other
program material that is mixed at very high listening
levels and has a compressed dynamic range.
Note
If Dynamic EQ is set to “Off”, these settings cannot
be selected.
• Audyssey Dynamic Volume
TM
:
Audyssey Dynamic Volume solves the problem of
large variations in volume level between television
programs, commercials, and between the soft
and loud passages of movies. Audyssey Dynamic
EQ is integrated into Dynamic Volume so that as
the playback volume is adjusted automatically, the
perceived bass response, tonal balance, surround
impression and dialog clarity remain the same.
The amount of compression can be set to any of
three levels.
Select “Light”, “Medium”, “Heavy” or “Off” with
the 1 or 2 cursor buttons.
Note
When Audyssey Dynamic EQ is off, Audyssey
Dynamic Volume cannot be used.
To change Audyssey Dynamic EQ and Audyssey
Dynamic Volume using the remote controller, press
the D.EQ/VOL button. Each time this button is
pressed, the mode changes in the sequence shown
below.
Off → Audyssey Dynamic EQ: On,
Audyssey Dynamic Volume: Off
→ Audyssey Dynamic EQ: On,
Audyssey Dynamic Volume: Light
→ Audyssey Dynamic EQ: On,
Audyssey Dynamic Volume: Medium
→ Audyssey Dynamic EQ: On,
Audyssey Dynamic Volume: Heavy
→ Off → ...
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR5004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR5004 in the language / languages: English as an attachment in your email.

The manual is 21,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info