Manual Marantz SR5004 (page 34 of 96) (English)

522801

Zoom out

Zoom in

1/96

NAMES AND

FUNCTIONS

BASIC

CONNECTIONS

BASIC

OPERATION

ADVANCED

CONNECTIONS

SETUP

ADVANCED

OPERATION

TROUBLESHOOTING

OTHERSSETUP

ENGLISH

SETUP

9. Select Speaker Distance with the 3 or

4 cursor button from the Manual Setup

menu, and press the ENTER button.

Speakers Distance

Unit

Front Left

Front Height Left

Center

Front Height Right

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Subwoofer

Return

: Feet

: 10.0 ft

: Up / Down : Change Enter : Exit : Exit

Use this menu to specify the distance of each

speaker’s position from the listening position. The

delay time is automatically calculated according to

these distances.

Begin by determining the ideal or most commonly

used seating position in the room.

This is important for the timing of the acoustics to

create the proper sound space that the unit and

today’s sound systems are able to produce.

Note

• For speakers for which you have selected

“None”, the speaker configuration sub-menu

will not appear here.

10. Select either Meters or Feet for Unit with

the 1 or 2 cursor buttons.

11. Select each speaker with the 3 or 4 cursor

buttons.

12. Set the distance for each speaker , press the

1 or 2 cursor buttons.

Front Left:

Set the distance from the front left speaker to your

normal listening position.

Front Height Left:

Set the distance from the front height left speaker

to your normal listening position.

Center:

Set the distance from the center speaker to your

normal listening position.

Front Right:

Set the distance from the front right speaker to your

normal listening position.

Front Height Right:

Set the distance from the front height right speaker

to your normal listening position.

Surround Left:

Set the distance from the surround left speaker to

your normal listening position.

Surround Right:

Set the distance from the surround right speaker to

your normal listening position.

Subwoofer:

Set the distance from the subwoofer to your normal

listening position.

Surround Back Left:

Set the distance from the surround back left speaker

to your normal listening position.

Surround Back Right:

Set the distance from the surround back right

speaker to your normal listening position.

Notes

• Set the distance to each speaker in meters (m) or

feet (ft) as follows.

m: 0.03 - 9.15 m in 0.03 m steps

ft: 0.1 - 30.0 ft in 0.1 ft steps

(The values appearing on the FL display are

approximate.)

• For the speakers that you have selected “No” the

speaker size menu will not appear.

• The setting for Surround Back Left and Surround

Back Right appears if it is set, two surround back

speakers in the Speaker Size menu.

• The setting of Surround Back appears if it is set

for one surround back speaker in the Speaker Size

menu.

13. After you complete this portion of the

setup, move the cursor to “Return” with

the 3 or 4 cursor buttons and press the

ENTER button to display the Manual Setup

screen.

14. Select Speakers Level with the 3 or 4

cursor button from the Manual Setup

menu, and press the ENTER button.

Speakers Level

Test ModeFront Left

Front Left

Front Height Left

Center

Front Height Right

Front Right

Surround Right

Surround Back Right

Surround Back Left

Surround Left

Subwoofer

Return

: Manual

: 0.0dB

: Up / Down : Change Enter : Exit : Exit

Here you can set the volume for each speaker so

that they are all heard by the listener at the same

level. We recommend holding a dB SPL (Sound

Pressure Level) meter at the listening position, at

arms length, and pointing straight up at the ceiling,

adjust the level of each speaker in turn unit it reads

75dB SPL when the meter is set to “C” weighting

and Slow responce.

Note

• The speaker level settings are not available in

7.1 Channel Input mode, Pure Direct mode and

Source Direct mode.

Test tone:

Select “Manual” or “Auto” generation of the test

tone with the 1 or 2 cursor buttons.

If you select “Auto”, the test tone will be cycled

through in a circular pattern beginning at Front

Left → Front Height Left → Center → Front

Height Right → Front Right → Surround Right

→ Surround Back Right → Surround Back Left

→ Surround Left → Subwoofer → Front Left, in 2

seconds increments for each channel.

Using the 1 or 2 cursor buttons, adjust the volume

level of the noise from the speaker so that it is the

same level for all the speakers.

If you select “Manual”, adjust the output level of

each speaker as listed below.

15. Move the cursor to Front Left by pressing

the 4 cursor button. This unit will emit a

pink noise from the front left speaker.

Remember the level of this noise and then

press the 4 cursor button.

(Note that this can be adjusted to any

level between -12 and +12 dB in 0.5 dB

increments.)

This unit will now emit the pink noise from

the center speaker.

16. Using the 1 or 2 cursor buttons, adjust the

volume level of the noise from the center

speaker so that it is the same level as the

front left speaker.

17. Press the 4 cursor button again. This unit

will now emit the pink noise from the front

right speaker.

18. Repeat steps 17 and 18 for the front right

and other speakers until all speakers are

adjusted to the same volume level.

After you complete this portion of the setup,

press the ENTER button to move the cursor

to “Return”. Press the ENTER button to go to

“Manual Setup”.

Notes

• Speakers for which you selected “None” in the

Speaker Size menu will not appear.

• Surround Back Left and Surround Back Right

appear if it is set for two surround back speakers

in the Speaker Size menu.

• Surround Back appears if it is set for one surround

back speaker in the Speaker Size menu.

• To adjust the speaker levels for 7.1 channel input

sources, you will need to use the 7.1 ch Input sub

menu. (See page 26)

• Subwoofer can be set from –18dB to +12dB.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR5004 in the language / languages: English as an attachment in your email.

The manual is 21,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR5004 Manual

Product: