Manual Marantz SR4001 (page 43 of 56) (English, Dutch)

522884

Zoom out

Zoom in

1/56

ENGLISH

CLEARING STORED PRESET STATIONS

You can remove preset stations from the memory

using the following procedure.

CAT

P.SCAN

CAT

T.MODE

123

456

789

+10

HT-EQ

MULTI/

SPKR A/B

INFO

CH/

INPUT

M-SPKR

MUTE

EX/ES

VIRTUAL

VOLUME

dts

7.1CH IN

STEREO

NIGHT

M-CH ST

AUTO

A/D

LIP SYNC/

CLCL

MEMOMEMO

DIGITAL

VIDEO

S-VIDEO

AUX 1 INPUT

T-MODE

MEMORY

DISPLAY

MUTE

VOLUME

DOWN

EXIT

BAND

CLEAR

ENTER

2. 3.

Recall the preset number to be cleared with

the method described in “Recalling” a preset

station.

Press the MEMO button on the front panel or

press the MEMO button on the remote.

The stored preset number blinks in the display

for 5 seconds. While blinking, press the CLEAR

button on the front panel or the remote.

“xx CLEAR” appears on the display to indicate

that the specified preset number has been

cleared.

Note:

To clear all stored preset stations, press and hold the

CLEAR and the ENTER buttons for two seconds.

SORTING PRESET STATIONS

MULTI

SPEAKER

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

SETUP

SIMPLE

MULTI

PURE

T-MODE

SURROUND

MEMORY

DISPLAY

ATT

MUTE

STANDBY

PHONES

POWER ON/STANDBY

INPUT SELECTOR

VOLUME

DOWN

AV SURROUND RECEIVER SR5001

DIRECT

AUTO

HT-EQ

EXIT

MODE

BAND

CLEAR

ENTER

If you have stations memorized, and there is a gap in

the sequential order:

I.e. the stations are stored as follows

1) 87.1 MHz

2) 93.1 MHz

3) 94.7 MHz

10) 105.9 MHz

(notice there is no stations programmed for pre sets

for 4-9), you can have pre set 10 become pre set 5:

To sort the numbers, press and hold the MEMO and

the 4 cursor buttons.

“PRESET SORT” will appear on the display and

sorting will be done.

NAME INPUT OF THE PRESET STATION.

This function allows the name of each preset channel

to be entered using alphanumeric characters.

Before name inputting, you need to store preset

stations with the preset memory operation.

CAT

T.DISP

F.DIRECT

PTY

PRESET

789

+10

CAT CAT

TUNINGTUNING

HT-EQ

MULTI/

SPKR A/B

EXIT

INFO

T.TONE

/SET UP

M-SPKR

MUTE

DVD VCR

DSS

VOLUME

BASS

TREBLE

7.1CH IN

REC

AUDIO

ANGLE

SUB TITLE

DISC+

CH-SEL

V-OFF

ATT.

A/D

ENTERENTER

MEMOMEMO

CH/CH/

2. 5. 6.

MULTI

SPEAKER

DIGITAL

RLVIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

SETUP

SIMPLE

MULTI

PURE

T-MODE

SURROUND

MEMORY

DISPLAY

ATT

MUTE

STANDBY

PHONES

POWER ON/OFF

INPUT SELECTOR

VOLUME

DOWN

AV SURROUND RECEIVER SR5001

DIRECT

AUTO

HT-EQ

EXIT

MODE

BAND

CLEAR

ENTER

5. 2.

Recall the preset number to be inputted name

with the method described in “Recalling” a

preset station.

Press the MEMO button on the front panel or

press the MEMO button on the remote for more

than 3 seconds.

The left most column of the station name

indicator ﬂ ashes, indicating the character entry

ready status.

When you press the 3 or 4 cursor buttons on

the front panel or the 5 / 6 buttons on the

remote, alphabetic and numeric characters will

be displayed in the following order:

A → B → C ... Z → 1 → 2 → 3 ..... 0 → – → +

→ / → (Blank) → A

UP →

← DOWN

After selecting the ﬁ rst character to be entered,

press the MEMO or ENTER buttons, press the

MEMO button on the remote.

The entry in this column is ﬁ xed and the next

column starts to ﬂ ash. Fill the next column the

same way.

To move back and forth between the characters,

press the 1 / 2 cursor buttons or press S or

T buttons on the remote.

Note:

Unused columns should be ﬁ lled by entering blanks.

To save the name, press the MEMO button

on the front panel or remote for more than 2

seconds.

Ten keypad Press, press again, press again, etc.

→ B → C → 1 → A

→ E → F → 2 → D

G → H → I → 3 → G

J → K → L → 4 → J

M → N → O → 5 → M

P → Q → R → 6 → P

→ T → U → 7 → S

→ W → X → 8 → V

Y → Z → space → 9 → Y

– → + → / → 0

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR4001 in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR4001 Manual

Product: