522884
32
Zoom out
Zoom in
Previous page
1/56
Next page
Model SR4001/SR5001 User Guide
AV Surround Receiver
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of suffi cient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU’AU FOND.
NOTE TO CATV SYSTEM INSTALLER:
This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Section 820-40 of the
NEC which provides guidelines for proper grounding and, in particular, specifi es that the cable ground shall
be connected to the grounding system of the building, as close to the point of cable entry as practical.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by tuning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment
and receiver.
- Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV
technician for help.
NOTE:
Changes or modifi cations not expressly approved by
the party responsible for compliance could void the
users authority to operate the equipment.
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to
meet strict quality and safety standards. There are,
however, some installation and operation precautions
which you should be particularly aware of.
1. Read Instructions All the safety and
operating instructions should be read before
the product is operated.
2. Retain Instructions The safety and
operating instructions should be retained for
future reference.
3. Heed Warnings – All warnings on the product
and in the operating instructions should be
adhered to.
4. Follow InstructionsAll operating and use
instructions should be followed.
5. Cleaning Unplug this product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6. Attachments – Do not use attachments not
recommended by the product manufacturer
as they may cause hazards.
7. Water and Moisture – Do not use this product
near water-for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and
the like.
8. Accessories – Do not place this product on
an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious
injury to a child or adult, and serious damage
to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturers instructions, and should use
a mounting accessory recommended by the
manufacturer.
9. A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
10. Ven tilation Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and
to protect it from overheating, and these
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on a bed, sofa, rug, or
other similar surface. This product should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturers instructions
have been adhered to.
11. Power Sources – This product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your product dealer or local
power company. For products intended to
operate from battery power, or other sources,
refer to the operating instructions.
1
ENGLISH
TABLE OF CONTENTS INTRODUCTION
Thank you for purchasing the Marantz SR4001/
SR5001 Surround receiver.
This remarkable component has been engineered
to provide you with many years of home theater
enjoyment. Please take a few minutes to read this
manual thoroughly before you connect and operate
the SR4001/SR5001.
As there are a number of connection and confi guration
options, you are encouraged to discuss your own
particular home theater setup with your Marantz A/V
specialist dealer.
This user guide covers the SR4001 and
SR5001, though the SR4001 is given for the
title. Explanations of features belonging
only to the SR5001 are indicated as “SR5001
only”.
XM Satellite Radio Ready
The XM name and related logos are registered
trademarks of XM Satellite Radio Inc.
SELECTING AN INPUT SOURCE ....................................31
VIDEO CONVERT .............................................................31
SELECTING THE SURROUND MODE ............................32
ADJUSTING THE MAIN VOLUME ...................................32
ADJUSTING THE TONE (BASS & TREBLE) CONTROL
....32
TEMPORARILY TURNING OFF THE SOUND ...................32
USING THE SLEEP TIMER ..............................................32
NIGHT MODE ...................................................................32
SURROUND MODE ..............................33
OTHER FUNCTION ..............................36
TV AUTO ON/OFF FUNCTION .........................................36
ATTENUATION TO ANALOG INPUT SIGNAL ...................36
LISTENING THROUGH HEADPHONES ........................36
DOLBY HEADPHONE MODE ........................................... 36
VIDEO ON/OFF ................................................................36
DISPLAY MODE ................................................................36
SELECTING ANALOG AUDIO INPUT OR
DIGITAL AUDIO INPUT ....................................................37
RECORDING AN ANALOG SOURCE ..............................37
HT-EQ ................................................................................37
7.1 CH INPUT ....................................................................37
AUX2 INPUT ......................................................................38
LIP.SYNC (SR5001 only) ...................................................38
BASIC OPERATION (TUNER) .............38
LISTENING TO THE TUNER ............................................38
PRESET MEMORY ...........................................................39
LISTENING TO XM SATELLITE RADIO ...........................41
SEARCH MODE ................................................................42
PRESET MEMORY ...........................................................44
TROUBLESHOOTING .......................................................45
MULTI ROOM SYSTEM
(SR5001 only) ..................................46
MULTI ROOM PLAYBACK USING THE
MULTI ROOM OUT TERMINALS .....................................46
MULTI ROOM PLAYBACK USING THE
MULTI SPEAKER TERMINALS ........................................46
SURROUND SPEAKER B SYSTEM
(SR4001 only) ..................................47
ANOTHER ROOM PLAYBACK USING THE
S (SURROUND) SPEAKER B TERMINALS ....................47
TROUBLESHOOTING ..........................48
TECHNICAL SPECIFICATIONS ..........49
DIMENSIONS .......................................49
SETUP CODES ........................................I
INTRODUCTION .....................................1
PRECAUTIONS .......................................1
DESCRIPTION ........................................2
FEATURES .............................................. 3
ACCESSORIES .......................................3
FRONT PANEL ........................................4
SR4001 .................................................................................4
SR5001 .................................................................................4
FL DISPLAY ..........................................................................6
REAR PANEL ..........................................7
SR4001 .................................................................................7
SR5001 .................................................................................7
REMOTE CONTROL OPERATION ........9
FUNCTION AND OPERATION ...........................................9
OPERATION OF REMOTE CONTROL UNIT .................. 11
GENERAL INFORMATION OF RC5001SR TO
SR4001/SR5001 ................................................................12
CONTROLLING MARANTZ COMPONENTS ..................13
BASIC OPERATION ..........................................................15
CONNECTIONS ....................................17
SPEAKER PLACEMENT ...................................................17
CONNECTING SPEAKERS ..............................................17
CONNECTING AUDIO COMPONENTS ..........................18
CONNECTING VIDEO COMPONENTS ..........................19
ADVANCED CONNECTING .............................................20
CONNECTING THE REMOTE CONTROL JACKS .........20
CONNECTING THE ANTENNA TERMINALS ..................21
XM RADIO OVERVIEW (SR5001 only) ............................22
CONNECTING THE XM ANTENNA .................................22
CONNECTING FOR THE
MULTI ROOM (SR5001 only) ............................................ 23
SETUP ...................................................25
ON SCREEN DISPLAY MENU SYSTEM .........................25
1 INPUT SETUP (ASSIGNABLE DIGITAL INPUT AND
COMPONENT VIDEO INPUT) ..........................................26
2 SPEAKER SETUP .........................................................26
3 PREFERENCE ..............................................................27
4 SURROUND ..................................................................28
5 PL II (PRO LOGIC II) MUSIC PARAMETER ...............28
6 CS II (CIRCLE SURROUND II) PARAMETER ............ 28
7 7.1 CH INPUT LEVEL ....................................................29
8 MULTI ROOM (SR5001 only) ........................................29
SIMPLE SETUP ....................................30
BASIC OPERATION (PLAYBACK) ......31
PRECAUTIONS
DO NOT LOCATE IN THE FOLLOWING PLACES
To ensure long-lasting use, do not locate the SR4001/
SR5001 where it is:
Exposed to direct sunlight.
Near sources of heat such as heaters.
In highly humid or poorly ventilated environments.
• Dusty.
Subjected to mechanical vibrations.
On wobbly, inclined or otherwise unstable
surfaces.
In locations such as in cramped audio racks
where radiated heat is blocked. To ensure proper
heat radiation, ensure the below clearance from
walls and other equipment.
8 ins.(0.2 m)
8 ins.(0.2 m)
8 ins
.
(0.2 m)8 ins
.
(0.2 m)
MULTI
DIGITALDIGITAL
RRLLVIDEOVIDEO
S-VIDEOS-VIDEO
AUX 1 INPUTAUX 1 INPUT
AUDIOAUDIO
SETUPSETUP
SIMPLESIMPLE
MULTI
PUREPURE
T-MODET-MODE
SURROUNDSURROUND
MEMORYMEMORY
DISPLAYDISPLAY
ATTATT
MUTEMUTE
STANDBY
PHONES
POWER ON/OFF
INPUT SELECTORINPUT SELECTOR
VOLUMEVOLUME
UPUP
DOWNDOWN
AV SURROUND RECEIVER SR5001AV SURROUND RECEIVER SR5001
DIRECTDIRECT
AUTOAUTO
HT-EQHT-EQ
EXITEXIT
MENUMENU
MODEMODE
BAND
BAND
CLEARCLEAR
ENTERENTER
SPEAKER
READY
2
ENGLISH
Dolby Pro Logic IIx is fully compatible with Dolby
Surround Pro Logic technology and can optimally
decode the thousands of commercially available
Dolby Surround encoded video cassettes and
television programs with enhanced depth and
spatiality. It can also process any high-quality
stereo or Advanced Resolution 5.1-channel music
content into a seamless 6.1- or 7.1-channel listening
experience.
The Dolby Headphone technology provides a
surround sound listening experience over headphones.
When listening to multichannel content such as DVD
movies over headphones, the listening experience
is fundamentally different than listening to speakers.
Since the headphone speaker drivers are covering
the pinna of the ear, the listening experience differs
greatly from traditional speaker playback. Dolby
utilizes patented headphone perspective curves to
solve this problem and provides a non-fatiguing,
immersive, home theater listening experience. Dolby
Headphone also delivers exceptional 3D audio from
stereo material.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, “Surround EX”, and the double-
D symbol are trademarks of Dolby Laboratories.
Circle Surround II (CS-II) is a powerful and versatile
multichannel technology. CS-II is designed to enable
up to 6.1 multichannel surround sound playback
from mono, stereo, CS encoded sources and other
matrix encoded sources. In all cases the decoder
extends it into 6 channels of surround audio and a
LFE/subwoofer signal. The CS-II decoder creates a
listening environment that places the listener “inside”
music performances and dramatically improves
both hi-fi audio conventional surround-encoded
video material. CS-II provides composite stereo rear
channels to greatly improve separation and image
positioning – adding a heightened sense of realism
to both audio and A/V productions.
DTS-ES Extended Surround is a new multichannel
digital signal format developed by Digital Theater
Systems Inc. While offering high compatibility with
the conventional DTS Digital Surround format, DTS-
ES Extended Surround greatly improves the 360-
degree surround impression and space expression
thanks to further expanded surround signals. This
format has been used professionally in movie
theaters since 1999.
In addition to the 5.1 surround channels (FL, FR, C,
SL, SR and LFE), DTS-ES Extended Surround also
offers the SB (Surround Back) channel for surround
playback with a total of 6.1 channels. DTS-ES
Extended Surround includes two signal formats with
different surround signal recording methods, as DTS-
ES Discrete 6.1 and DTS-ES Matrix 6.1.
“DTS”, “DTS-ES” and “Neo:6” are trademarks of
Digital Theater Systems, Inc.
The stereo CD is a 16-bit medium with sampling at
44.1 kHz. Professional audio has been 20- or 24-
bit for some time, and there is increasing interest
in higher sampling rates both for recording and for
delivery into the home. Greater bit depths provide
extended dynamic range. Higher sampling rates
allow wider frequency response and the use of anti-
alias and reconstruction fi lters with more favorable
aural characteristics.
DTS 96/24 allows for 5.1channel sound tracks to be
encoded at a rate of 96kHz/24bits on DVD-Video
titles.
When DVD-video appeared, it became possible to
deliver 24-bit, 96 kHz audio into the home, but only in
two channels, and with serious limitations on picture.
This capability has had little use.
DVD-audio allows 96/24 in six channels, but a
new player is needed, and only analog outputs are
provided, necessitating the use of the D/A converters
and analog electronics provided in the player.
DTS 96/24 offers the following:
1. Sound quality transparent to the original 96/24
master.
2.
Full backward compatibility with all existing
decoders. (Existing decoders will output a 48 kHz
signal)
3. No new player required: DTS 96/24 can be carried
on DVD-video, or in the video zone of DVD-audio,
accessible to all DVD players.
4. 96/24 5.1-channel sound with full-quality full-
motion video, for music programs and motion
picture soundtracks on DVD-video.
“DTS” and “DTS 96/24” are trademarks of Digital
Theater Systems, Inc.
Dolby Digital identifi es the use of Dolby Digital audio
coding for such consumer formats as DVD and DTV.
As with fi lm sound, Dolby Digital can provide up
to fi ve full-range channels for left, center, and right
screen channels, independent left and right surround
channels, and a sixth (“.1”) channel for low-frequency
effects.
Dolby Surround Pro Logic II is an improved matrix
decoding technology that provides better spatiality
and directionality on Dolby Surround program
material; provides a convincing three-dimensional
soundfi eld on conventional stereo music recordings;
and is ideally suited to bring the surround experience
to automotive sound. While conventional surround
programming is fully compatible with Dolby Surround
Pro Logic II decoders, soundtracks will be able to be
encoded specifi cally to take full advantage of Pro
Logic II playback, including separate left and right
surround channels. (Such material is also compatible
with conventional Pro Logic decoders.)
Dolby Digital EX creates six full-bandwidth output
channels from 5.1-channel sources. This is done
using a matrix decoder that derives three surround
channels from the two in the original recording. For
best results, Dolby Digital EX should be used with
movies soundtracks recorded with Dolby Digital
Surround EX.
About Dolby Pro Logic II x
Dolby Pro Logic IIx technology delivers a natural
and immersing 7.1-channel listening experience
to the home theater environment. A product of
Dolby’s expertise in surround sound and matrix
decoding technologies, Dolby Pro Logic IIx is a
complete surround sound solution that maximizes
the entertainment experience from stereo as well as
5.1-channel encoded sources.
DESCRIPTION
DTS was introduced in 1994 to provide 5.1 channels of
discrete digital audio into home theater systems.
DTS brings you premium quality discrete multichannel
digital sound to both movies and music.
DTS is a multichannel sound system designed to
create full range digital sound reproduction.
The no compromise DTS digital process sets the
standard of quality for cinema sound by delivering
an exact copy of the studio master recordings to
neighborhood and home theaters.
Now, every moviegoer can hear the sound exactly as
the moviemaker intended.
DTS can be enjoyed in the home for either movies or
music on of DVD’s, LD’s, and CD’s.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
The advantages of discrete multichannel systems
over matrix are well known.
But even in homes equipped for discrete multichannel,
there remains a need for high-quality matrix decoding.
This is because of the large library of matrix surround
motion pictures available on disc and on VHS tape; and
analog television broadcasts.
The typical matrix decoder of today derives a center
channel and a mono surround channel from two-
channel matrix stereo material. It is better than a
simple matrix in that it includes steering logic to
improve separation, but because of its mono, band-
limited surround it can be disappointing to users
accustomed to discrete multichannel.
Neo:6 offers several important improvements as
follow,
Neo:6 provides up to six full-band channels of
matrix decoding from stereo matrix material. Users
with 6.1 and 5.1 systems will derive six and fi ve
separate channels, respectively, corresponding to
the standard home-theater speaker layouts.
Neo:6 technology allows various sound elements
within a channel or channels to be steered
separately, and in a way which follows naturally
from the original presentation.
Neo:6 offers a music mode to expand stereo nonmatrix
recordings into the fi ve- or six-channel layout, in a way
which does not diminish the subtlety and integrity of
the original stereo recording.
3
ENGLISH
FEATURES
The SR4001/SR5001 incorporates the latest
generation of digital surround sound decoding
technology such as Dolby Digital EX, Dolby Digital,
DTS-ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6
(Cinema, Music), Dolby Pro-Logic IIx (Movie, Music
and Game), Circle Surround II (Cinema and Music).
In addition, Marantz has focused on the future.
By utilizing pre-out jacks, 7.1 direct inputs and a
RS-232C communication port (SR5001 only), the
SR4001/SR5001 is tomorrow’s technology, today!
The SR4001/SR5001 features a fully discrete 7
channel amplifi er section capable of delivering 80
watts (SR4001)/90 watts (SR5001) of high-current
amplification, for continuously clean and stable
power into each of the 7 channels. It employs a
massive EI power transformer in combination with
oversized fi lter capacitors. This design confi guration
is capable of a clear and powerful reproduction of the
most demanding action movie soundtracks and full
range (multichannel) music discs. Through its ability
to generate very high output voltages, the SR4001/
SR5001 can easily drive the most demanding
speakers with optimum results.
The SR4001/SR5001 incorporates the most
advanced Digital Signal Processing circuitry, along
with a Crystal
®
192 kHz/24 bit D/A converter in
each of the 7 channels. Independent power supply
circuits are incorporated for the FL display, audio
and video sections for maximum separation, clarity
and dynamic range. Together with hand-selected
customized components, all elements work in
harmony to recreate the emotion, exactly as the artist
had intended.
The SR4001/SR5001 is designed and engineered
with extensive feedback from custom installation
experts, dealers and consumers. It features multi-
room/multisource, a RS-232C communication port
(SR5001 only), heavy duty speaker binding posts
and an extensive array of both analog and digital
inputs / outputs. With 6 assignable digital inputs
(including Front Aux), 3 assingnable component
inputs (SR5001), 5 assignable digital input
(SR4001), Super Audio CD Multi Channel (7.1
channel) direct inputs video convert system and
OSD output versatility is taken to a stunning new
level. Furthermore, the SR4001/SR5001 can output
the OSD information through the Y/C (S-video) and
composite video outputs.
An easy-to-use universal remote control allows full
access to all of the operating functions and can be
used for system operation as well.
This unit has Simple Setup function for easy setup.
You can setup all speaker settings by just selecting
your room size and the number of your speakers with
Simple Setup function. You can also setup customized
settings just like conventional AV amplifi ers.
Dolby Digital EX, Dolby Digital ,
DTS ES (Discrete 6.1, Matrix 6.1, Neo: 6)
Dolby Headphone 2
Dolby Pro Logic IIx (Movie, Music, Game)
• Circle Surround II (Movie, Music, Mono)
• HDCD decording
• 7 × 80 Watts (8 Ohm) (SR4001)/7 × 90 Watts (8
Ohm) (SR5001), Discrete Amplifi ers
High Power Current Feedback Circuitry
Massive Energy Power Supply, Huge EI
Transformer, Large ELCO’s.
192 kHz/24 bit Crystal
®
DAC for all 8 Channels
32 bit Digital Surround Processing Chipsets
Video Off Mode
Large Heavy Duty Speaker Terminals for all
Channels
RS-232C Terminal for System Control (SR5001only)
Set Up Menu via all Video Output (Composite, S-
Video and Component video)
Auto Input Signal Detection
Improved Station Name Input Method, 50 Presets
Auto Adjust Function for Speaker Distance Settings
(Delay Time)
Front AUX Input (Digital Camera, Portable DVD)
Universal remote control
Simple Setup Function
Video convert system
LIP.SYNC Funciton (Audio delay) (SR5001 only)
ACCESSORIES
Remote Controller RC5001SR
SY
S
T
E
M
R
EM
OT
E
C
O
N
TR
O
LL
E
R
RC
5
50
0S
R
E
XIT
S
E
T
UP
/
MENU
OSD
ENTER
7.1CH IN
A/D
HT-EQ
P.S
CAN
STEREO
NIG
HT
M-CH ST
CS
I
I
EX/ES
VIRTUAL
T.MO
DE
IN
PU
T
LIP
SY
NC
/
d
ts
AITP
MU
LTI/CAT
M-SPKR
SPKR A/B
MU
T
E
T
RE
BL
E
B
AS
S
CH-S
E
L
V
-OF
F
AT
T.
AU
DIO
SU
BT
ITLE
DIS
C+
ANG
LE
3
B
A
N
D
2
1
6
4
5
4
9
4
8
7
+10
M
E
M
O
0
C
L
D
S
SV
C
R
D
V
D
T
V
F.DIRECT
PTY
T.DIS
P
BASS
T
UNING
PRESET
T.TON
E
CH/C
AT
VOLLUME
O
FF
O
N
S
O
U
RC
E
SURR
OUN
D
P.DIRECT
D
ISPLA
Y
SLEEP
SET
LEARN
SEND
TAPE
AU
X 1
AUX
2
AMP
TUNER
CD
CDR
MD
l/l/
AAA-size batteries × 2
AM Loop Antenna
FM Antenna
AC Power Cord
Front AUX Jack Cover
PUSH
PUSH
User Guide
Warranty Card
USA × 1
Canada × 1
CS-II is packed with other useful feature like dialog
clarity (SRS Dialog) for movies and cinema-like bass
enrichment (TruBass). CS-II can enable the dialog
to become clearer and more discernable in movies
and it enables the bass frequencies contained in
the original programming to more closely achieve
low frequencies – overcoming the low frequency
limitations of the speakers by full octave.
Circle Surround II, Dialog Clarity, TruBass, SRS and
symbol are trademarks of SRS Labs, Inc.
Circle Surround II, Dialog Clarity and TruBass
technology are incorporated under license from SRS
Labs, Inc.
HDCD
®
(High Defi nition Compatible Digital
®
) is a
patented process for delivering on Compact Disc the
full richness and details of the original microphone
feed.
HDCD encoded CDs sound better because they are
encoded with 20-bits of real musical information as
compared to 16-bits for all other CDs.
HDCD overcomes the limitation of the 16-bit CD
format by using a sophisticated system to encode
the additional four bits onto the CD while remaining
completely compatible with the CD format.
When listening to HDCD recordings, you hear more
dynamic range, a focused 3-D sound stage, and
extremely natural vocal and musical timbre. With
HDCD, you get the body, depth and emotion of the
original performance not a fl at, digital imitation.
HDCD system manufactured under license from
Microsoft. This product is covered by one or more
of the following: In the United States 5,479,168
5,638,074 5,640,161 5,808,574 5,838,274 5,854,600
5,864,311 5,872,531 and in Australia 669,114 with
other patents pending.
HDMI, the and High-Defi nition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
5
ENGLISH
!3 ATT (Attenuate) button
If the selected analog audio input signal is greater
than the capable level of internal processing, the
PEAK indicator will illuminate. If this happens, you
should press the ATT button. “ATT” is displayed
when this function is activated.
The signal-input level is reduced by about half.
Attenuation will not work with the output signal of
“REC OUT” (TAPE, CD-R/MD, VCR1 and VCR2
output). This function is memorized for each input
function.
!4 MUTE button
Press this button to mute the output to the speakers.
Press it again to return to the previous volume level.
!5 T-MODE button
Press this button to select the auto stereo mode or
mono mode when the FM band is selected.
The “AUTO” indicator lights in the auto stereo mode.
(See page 39)
!6 BAND button
Press this button to switch between FM and AM in
the TUNER mode.
!7 EXIT button
This button is used to exit from the SETUP MAIN
MENU.
!8 Cursor (1, 2, 3, 4) / ENTER button
Use these buttons when operating the SETUP MAIN
MENU and TUNER function.
!9 MENU button
This button is used to enter the SETUP MAIN
MANU.
@0 HT-EQ button
Used to turn on or off HT(Home Theater)-EQ mode.
This mode compensates for the audio portion of
a movie sounding “bright”. When this button is
pressed, “EQ” indicator lights up.
@1 AUTO (Auto surround) button
Press this button to select the AUTO mode from the
surround modes. When this mode is selected, the
receiver determines the surround mode corresponding
to a digital input signal automatically.
@2
HEADPHONE jack for stereo
headphones
This jack may be used to listen to the SR4001/
SR5001’s output through a pair of headphones. Be
certain that the headphones have a standard 1 / 4”
stereo phono plug. Note that the main room speakers
will automatically be turned off when the headphone
jack is in use.
Notes:
• When using headphones, the surround mode will
change to STEREO and Dolby Headphone by
MENU and Cursor button.
• The surround mode returns to the previous setting
as soon as the headphone plug is removed from the
jack.
@3 AUX1 INPUT jacks
These auxiliary video/audio input jacks accept the
connections of a camcorder, portable DVD, game
etc.
6
ENGLISH
FL DISPLAY
DISP MULTI AUTO TUNED ST V
OFF NIGHT PEAK ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT DISC 6.1 MT X 6.1 SPKR B EQ
DIGITAL
SURROUND
PCM
L
C
R
SL S SR
LFE
¡8
¡
7
g
s
a
¡
6
0
¡
9
h 0 ¡2 ¡4f
j l ¡1
¡3
¡5d
a DISP (Display Off) indicator
This indicator is illuminated when the SR4001/
SR5001 is in the display off condition.
s SLEEP timer indicator
This indicator is illuminated when the sleep timer
function in the main-room is in use.
d Multi-room system indicator
This indicator is illuminated when the multi-room
system is active.
f AUTO SURR (Auto Surround
mode) indicator
This indicator is illuminated to show that the AUTO
SURROUND mode is in use.
g TUNER’s indicators
AUTO : This indicator illuminates when the
tuners Auto mode is in use.
TUNED : This indicator illuminates when
a station is being received with
suffi cient signal strength to provide
acceptable listening quality.
ST(Stereo) : This indicator illuminates when an
FM station is being tuned into stereo
condition.
h DTS-ES mode indicators
(DISC6.1, MTX6.1)
These indicators will illuminate to show the DTS-ES
decoding mode (Discrete 6.1 or Matrix 6.1).
j V (video)-OFF mode indicator
This indicator is illuminated when the Video-OFF
function is active.
k NIGHT mode indicator
This indicator is illuminated when the SR4001/
SR5001 is in the Night mode, which reduces the
dynamic range of digital program material at low
volume levels.
l SPKR (speaker) B indicator
This indicator is illuminated when the M (Multiroom)
speaker B system is active.
¡0 PEAK indicator
This indicator is a monitor for an analog audio input
signal. If the selected analog audio input signal is
greater than the capable level of internal processing,
this will illuminate. If this happens, you should press
the ATT button on the remote.
¡1 EQ mode indicator
This indicator is illuminated when the HT-EQ function
is active.
¡2 ATT (Attenuation) indicator
This indicator is illuminated when the attenuation
function is active.
¡3 DIGITAL Input Indicator
This indicator lights when a digital input has been
selected.
¡4 ANALOG input indicator
This indicator is illuminated when an analog input
source has been selected.
¡5 SIGNAL FORMAT indicators
2 DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some
of these indicators will be illuminated to display the
specifi c type of signal in use.
¡6 ENCODED CHANNEL STATUS
indicators
These indicators display the channels that are
encoded with a digital
input signal. If the selected digital input signal is
Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”,
“SR” and “LFE” will be illuminated.If the digital input
signal is 2 channel PCM-audio, “L” and “R” will be
displayed.
If Dolby Digital 5.1ch signal with Surround EX fl ag or
DTS-ES signal comes in, “L”, “C”, “R”, “SL”, “S” , “SR”
and “LFE” will be illuminated.
¡7 Main Information Display
This display shows messages relating to the status,
input source, surround mode, tuner, volume level or
other aspects of unit’s operation.
¡8 DIRECT (Puredirect) indicator
This indicator is illuminated when the SR4001/
SR5001 is in the SOURCE DIRECT mode.
¡9 HDCD indicator
When HDCD signal is decoded from digital input, this
indicator will light up.
™0 HDMI indicator
This indicator is illuminated when HDMI device is
connected to the SR4001/SR5001.
HOW TO ATTACH THE FRONT AUX JACK COVER
UP
M
U
TE
T-MO
DE
N
D
A
U
X
1
IN
P
U
T
A
U
D
I
O
S
-
V
ID
E
O
V
ID
E
O
L
R
7.1C
H INPU
T
DIG
IT
AL
PUSH
PUSH
Front AUX Jack Cover
29
ENGLISH
8 MULTI ROOM (SR5001 only)
SR5001 has features in MULTI ROOM SYSTEM
such as source selector, sleep timer, Multi Room
Speaker output and remote control.
You can set these feature in this sub-menu.
8 MULTI ROOM
AUDIO : DVD
SLEEP TIMER : OFF
MULTI:OUT : STEREO
MULTI:OFF MSPK :
VOL : VARI
LEVEL : -90dB
--- MAIN ROOM STATUS ---
VIDEO:DVD AUDIO:DVD
MAIN EXIT
1.
Select MULTI ROOM” in the SETUP MAIN
MENU with 3 or 4 cursor button, and press the
ENTER button.
2.
To Select desired contents, press 3 or 4 cursor
button
AUDIO:
Select the audio source of the Multi-room output
with 1 or 2 cursor buttons.
SLEEP TIMER:
SLEEP timer function is available during the
multiroom is active, set the time with 1 or 2 cursor
buttons.
MULTI OUT:
To switch MULTI and MSPK outputs to either
STEREO or MONO, press 1 or 2 cursor button.
MULTI (MULTI ROOM):
To switch on the Multi-room output ON or OFF,
press 1 or 2 cursor button.
VOL (VOLUME SETUP):
Select whether the Multi-room output level is
variable or fi xed with a 1 or 2 cursor buttons.
LEVEL (VOLUME LEVEL):
Adjust the Multi-room output level with 1 or 2
cursor buttons.
MSPK B (MULTI SPEAKER B):
To switch on the Multi-speaker B output ON or
OFF, press 1 or 2 cursor buttons.
Note:
This setting can be changed when the Surr Back is set
“NONE” in 2-1 SPEAKER SIZE menu. When this
setting is unavailable, “✽✽✽” is displayed
VOL (VOLUME SETUP):
Select whether the Multi-speaker output level is
variable or fi xed with a 1 or 2 cursor buttons.
Note:
This setting can be changed when the Surr Back is set
“NONE” in 2-1 SPEAKER SIZE menu. When this
setting is unavailable, “✽✽✽” is displayed
7 7.1 CH INPUT LEVEL
This sub-menu is to adjust the speaker levels for 7.1-
channel input sources.
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.
7 7.1 CH. INPUT LEVEL
VIDEO-IN : LAST
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR.R : 0 dB
SURR.B R : 0 dB
SURR.B L : 0 dB
SURR.L : 0 dB
SUB W : 0 dB
MAIN EXIT
1.
Select 7.1CH INPUT” in the SETUP MAIN
MENU with the 3 or 4 cursor buttons, and
press the ENTER button.
2.
To select “VIDEO IN”, press 3 or 4 cursor
button.
3.
Using the 1 or 2 cursor buttons, select the
video input source which is emitted from
Monitor out in the 7.1 CH INPUT function.
The input source is switched by pressing the
1 or 2 cursor buttons as follows;
LAST TV DVD VCR1 DSS
AUX1 V-OFF LAST
Notes:
When select LAST, the source is set previous source
before 7.1 CH INPUT function
is activated.
When select V-OFF, no signal is emitted from monitor
out terminal.
4.
To Select desired channel , press the 3 or 4
cursor buttons.
5.
Using the 1 or 2 cursor buttons, adjust the
volume level of each channel.
6.
After you complete this portion of the set up,
move the cursor to “MAIN” with the 3 or 4
cursor buttons and press the ENTER button.
Notes:
These settings will be memorized to 7.1CH INPUT
source.
This feature can be directly selected with the
CH.SEL button of the remote controller.
LEVEL (VOLUME LEVEL):
Adjust the Multi-speaker output level with 1 or 2
cursor button.
Note:
This setting can be changed when the Surr Back is set
“NONE” in 2-1 SPEAKER SIZE menu. When this
setting is unavailable, “✽✽✽” is displayed
MAIN ROOM STATUS:
Selected input source in the main room will be
displayed.
Note:
If “VOLUME” is set to “FIXED”, the multi-room
output level cannot be adjusted from the second zone.
After you complete this portion of the set up, move
the cursor to “MAIN” with 3 or 4 cursor buttons and
press ENTER button.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR4001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR4001 in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info