570389

Marantz SR12S1 Manual

49
Zoom out
Zoom in
Previous page
1/76
Next page
69
10. UPDATE FIRMWARE
Software for CPU and DSP can be updated.
Have *SR12S1CDR update disc.
There are two mode of download, regarding to the target of software as bellow.
Mode 1: Download DSP’s software to 4M Flash-ROM.
This mode is to update the software for DSP.
The target devise is 4M –Flash ROM (Q671) on P604.
SR-12S1 need to be set download condition, by three front keys.
Mode 2: Download CPU’s software to internal Flash-ROM.
This mode is to update the software for CPU.
The target devise is internal flash ROM of CPU (QU01) on P604.
The unit needs to be set to writing condition, by pushing internal switch from back-panel.
The following items are required for updating.
RS232C Dsub-9 pin cable (female to female/Straight type)
PC (Windows 98, NT, ME, 2000) with RS-232C port.
Upgrade software to CPU.
Upgrade software to DSP.
Use RS232C Dsub-9 pin cable (female to female/Straight type) to connect PC and the unit.
COM port on PC needs to be set by dialog box for each program. COM port can be set from COM1 to COM5.
Download Firmware for DSP (Mode 1)
1. Put the "DSP upgrade" folder into anywhere on your PC’s hard disc.
2. Connect PC and the unit with the RS-232C cable.
3. Turn on the unit.
4. Press TUNER, AUX1 and MULTI ROOM buttons simultaneously more than 5 seconds to turn the unit into Loading
Mode.
5. "LOADING MODE" will be shown on FLD.
6. Launch "UpgradeDSP.exe" on PC.
7. Set the Baud Rate to 38400 then click Start communication button. If the connection is made successfully, a dialog
box saying "Success to connect" appears and "CONNECTED" is displayed on FLD.
8. Click Send the DSP codes button on the dialog box. Progress status of downloading will be shown on PC and
"LOADING" is displayed on FLD.
9. If downloading is completed successfully, "COMPLETED" is displayed on FLD. And a dialog box saying "Finished the
DSP code transmitting" appears. Click OK and then click CLOSE to close the application.
10. Turn off the unit.
ATTENTION:
The program isn’t written in the ROM of QU01 and Q671.
• When QU01 or Q671 was replaced, Writing of software is necessary.
• Write it with the procedure of UPDATE FIRMWARE
Downloaded from www.Manualslib.com manuals search engine
… 49 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR12S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR12S1 in the language / languages: English as an attachment in your email.

The manual is 11,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR12S1

Marantz SR12S1 User Manual - English - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info