6616
5
Zoom out
Zoom in
Previous page
1/6
Next page
5
ENGLISH
PRESET MEMORY
You can store the desired channel in the Preset
Memory.
(Using the SR9600)
1.
Tune into the desired channel.
2.
Press the MEMORY button on the front panel.
PRESET – – (preset number) starts blinking
on the display.
3.
Select the preset number by rotating the
GYRO TUNING dial, while it is still blinking
(approx. 5 second)
4.
Press the MEMORY button again to enter.
The display stops blinking.
The Channel is now stored in the specified
preset memory location.
(Using the remote control unit)
1.
Tune into the desired channel.
2.
Tap the Memo on the remote control unit.
PRESET – – (preset number) starts blinking
on the display.
3.
Enter the desired preset number by tapping
the numeric keypads.
Note
When entering a single digit number (2 for
example), either input 02 or just input 2
and wait for a few seconds.
2/2 XM
XM : Key
wed Jun 01 4:40pm
2.
3.
MULTIMULTI
SPEAKERSPEAKER
F/PF/PBANDBANDTHXTHXPURE DIRECTPURE DIRECT UPUP
DOWNDOWN
TUNINGTUNING
AUX 1 INPUT
RAUDIO
DIGITAL S-VIDEO
LVIDEO
POWER ON/STANDBY
VOLUME
UPDOWN
INPUT SELECTOR
PHONES
STANDBY
AV SURROUND RECEIVER SR9600
SURROUNDSURROUND
MICMIC
ENTERENTER
MENUMENU
PURE DIRECTPURE DIRECT THXTHX
7.1CH INPUT7.1CH INPUT
MODEMODE AUTOAUTO
MULTIMULTI
A/BA/B
T-MODET-MODE
MEMORYMEMORY CLEARCLEAR
DISPLAYDISPLAY
EXITEXIT
SPEAKERSSPEAKERS
MRACMRAC
AUTO TUNEAUTO TUNE
3.
2. 4.
CHECKING THE PRESET CHANNEL
The preset channel can be checked on the on
screen display.
(Using the remote control unit)
1.
Tap the Info. to view a list of tuner preset
channel on the on screen display.
2.
If there are 10 or more preset channel, tap the
Info. again.
Note
The preset channel indication disappears in about
5 sec.
PRESET SCAN
(Using the remote control unit)
1.
Tap the P-Scan on the remote control unit.
PRESET SCAN appears on the display and
then the preset station with the lowest preset
number is recalled first.
2.
Preset stations are recalled in sequence (No. 1
No. 2 etc.) for about 5-10 seconds each. The
time changes by the received condition. No
stored preset number will be skipped.
3.
You can fast forward through the Preset
stations by tapping the Preset continuously.
When the desired preset station is received,
cancel the preset scan operation by tapping
the CLR or P-Scan.
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
1.
Recall the preset number to be cleared with
the method described in RECALLING A
PRESET CHANNEL.
2.
Press the MEMORY button on the front panel
or tap the Memo on the remote control unit.
3.
The stored preset number blinks in the display
for 5 seconds. While blinking, press the
CLEAR button on the front panel or tap the
CLR on the remote control unit.
4.
xx CLEAR appears on the display to
indicate that the specified preset number has
been cleared.
Note
To clear all stored preset channels, press and hold
the CLEAR and the F/P buttons for two seconds.
There are 50 preset channels prepared at the
factory default. The 50 channels are all set to
CHANNEL 001. Each channel can be stored in
the preset memory. You can search for only the
preset channels.
1/2 XM
XM : Main
wed Jun 01 4:40
pm
1.
2.
1/2 XM
XM : Main
wed Jun 01 4:40
pm
1.
3.
3.
2/2 XM
XM : Key
wed Jun 01 4:40
pm
2. 3.
MULTI
SPEAKER
F/PF/PBANDBANDTHXPURE DIRECT UPUP
DOWN
TUNING
AUX 1 INPUTAUX 1 INPUT
RAUDIO
DIGITALDIGITAL S-VIDEOS-VIDEO
LVIDEVIDEO
POWER ON/STANDBY
VOLUMEVOLUME
UPDOWNDOWN
INPUT SELECTOR
PHONES
STANDBY
AV SURROUND RECEIVER SR9600
SURROUND
MICMIC
ENTER
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
A/BA/B
T-MODET-MODE
MEMORYMEMORY CLEARCLEAR
DISPLAYDISPLAY
EXITEXIT
SPEAKERSSPEAKERS
MRACMRAC
AUTO TUNEAUTO TUNE
3.2.
1 XM001 Previ ew
NO .
2 XM001 Previ ew
NO .
3 XM001 Previ ew
NO .
4 XM001 Previ ew
NO .
5 XM001 Previ ew
NO .
6 XM001 Previ ew
NO .
7 XM001 Previ ew
NO .
8 XM001 Previ ew
NO .
9 XM001 Previ ew
NO .
TUNER PRESET L I ST
SR9600U DFU_01_ENG XM 06.1.16, 4:44 PMPage 5 Adobe PageMaker 6.5J/PPC
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-9600XM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-9600XM in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info