6610
9
Zoom out
Zoom in
Previous page
1/14
Next page
34
ENGLISH
SURROUND
1.
Select “SURROUND” in MAIN SETUP MENU with Up or Down
cursor button, and press the OK button.
2.
To select a desired content , press Up or Down cursor button.
SURR-MODE : Select the desired surround mode with Left or
Right cursor button.
CINEMA RE-EQ™ : Select to active the Cinema Re-EQ™ with Left
or Right cursor button.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is
because film soundtracks were designed to be
played back in large movie theater environments.
Activating the Cinema Re-EQ™ feature when
watching a film made for movie theaters corrects
this and restores the correct tonal balance.
Cinema Re-EQ™ is therefore not necessary for
material that was not designed for movie
theaters (for example, sports programming,
television shows, made for TV movies, etc..).
The Cinema Re-EQ™ feature can be activated
only while in Dolby Pro Logic Mode, or while
decoding Dolby Digital or DTS encoded material.
LFE LEVEL : Select the output level of the LFE signal included
in the Dolby Digital signal or the DTS signal.
Select 0dB, -10 dB or OFF with Left or Right
cursor button.
The level is ordinarily set to 0 dB except DTS-
Music mode. In the DTS-Music mode, default
level is set to -10 dB.
EFFECT LEVEL
SURR L/R EFFECT: Set the effect level of the Surround speaker
between –3 and +3 level in 1 level interval .
• If “None” was selected for the Surround speakers setting in the
Speaker size, then this setting will not appear.
SURR BACK EFFECT : Set the effect level of the Surround Back speaker
between –3 and +3 level in 1 level interval .
• If “None” was selected for the Surround back speakers setting
in the Speaker size, then this setting will not appear.
CENTER EFFECT : Set the effect level of the center speaker between
–3 and +3 level in 1 level interval .
• If “None” was selected for the Center speaker setting in the
Speaker size, then this setting will not appear.
SUB W EFFECT : Set the effect level of the subwoofer speaker
between –3 and +3 level in 1 level interval .
• If “None” was selected for the Subwoofer speaker setting in the
Speaker size, then this setting will not appear.
Note:
These effect level set up are available only while in HALL,
MATRIX, MOVIE, CSII, Multi CH. STEREO.
If you finish the setup in this item, move cursor to “MAIN” with Up or
Down cursor buttons and press OK button.
4 SURROUND
SURR . MODE : AUTO
CINEMA RE-EQ : OFF
LFE LEVEL : 0 dB
SURR L /R EF FECT :
dB
SURR BACK EFFECT :
dB
CENTER EFFECT :
dB
SUB W EFFECT :
dB
MA I N E X I T
PREFERENCE
1.
Select “PREFERENCE” in MAIN SETUP MENU with Up or Down
cursor button, and press the OK button.
2.
To select a desired content, press Up or Down cursor button.
TV AUTO: Select the TV AUTO ON/OFF function to enable or
disable with Left or Right cursor button.
(refer to page 43)
OSD Info: Select the OSD information function to enable or
disable with Left or Right cursor button.
If you select “ENABLE”, SR9300 will display the status
of the feature (Volume up/down, input select, etc..) on
the TV monitor. But if you do not desire this
information, select “DISABLE “.
DIG. OUT: Select the digital source to output the DIGITAL OUT
terminals with Left or Right cursor button.
This is for digital dubbing to a CD-R recorder or MD
deck. (See page 44)
The source is switched in the following sequence.
SOURCE DIG.1 DIG.2 DIG.8 DIG.9
AUX OFF SOURCE
SUB-W OUT: “THX” position is required, but If you desire an
additional front L/R mixed subwoofer output in the
STEREO mode, select “L/R MIX” with Left or Right
button.
If you finish the setup in this item, move cursor to “MAIN” with Up or
Down cursor buttons and press OK button.
3PREFERENCE
TV-AUTO : DISABLE
OSD I NFO : ENABLE
DIGITAL OUT : SOURCE
SUBWOOFER OUT : THX
MA I N E X I T
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-9200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-9200 in the language / languages: English as an attachment in your email.

The manual is 5,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR-9200

Marantz SR-9200 User Manual - English - 54 pages

Marantz SR-9200 User Manual - English - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info