Manual Marantz SR-8500 (page 26 of 58) (English)

6608

Zoom out

Zoom in

1/58

ENGLISH

5 CS II (CIRCLE SURROUND II )

PARAMETER

Select “CS II ” in the SETUP MAIN MENU with

the

or cursor buttons, and press the

ENTER button.

To Select desired contents as below, press

the or cursor buttons.

TRUBASS:

Set the TRUBASS level between 0 and 6 level in

1 level interval with the

or cursor buttons.

TRUBASS produced by the speakers are an

octave below the actual physical capabilities of

the speakers adding exciting, deeper bass

effects.

SRS DIALOG:

Set the SRS DIALOG level between 0 and 6 in 1

level intervals with the or cursor buttons.

This can be popped out of the surround audio

effects, allowing the listener to easily discern what

the actors say.

If “NONE” was selected for the Center speaker

setting, in the Speaker size set up menu, then this

setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the or cursor buttons and

press the

ENTER

button.

4 PL II (PRO LOGIC II )

MUSIC PARAMETER

Pro Logic II-Music mode creates a rich and

enveloping surround ambience from stereo

sources such as CDs.

In this

mode, SR7500 includes three controls to

fine-tune the soundfield as follows.

Select “PL II MUSIC” in the SETUP MAIN MENU

with the

or cursor buttons, and press the

ENTER button.

PARAMETER:

Select “DEFAULT” or “CUSTOM” with the or

cursor buttons.

If you select “CUSTOM”, you can adjust three

parameters as listed below.

PANORAMA:

Select the Panorama mode On or Off with the

or cursor buttons.

Panorama wraps the sound of the front left and right

speakers around you, for an exciting perspective.

DIMENSION:

Set the Dimension level between 0 and 6 level in

1 level intervals with the or cursor buttons.

Adjust the soundfield either towards the front or

towards the rear.

This can be useful to help achieve a more

suitable balance from all the speakers with

certain recordings.

CENTER WIDTH:

Set the Center width level between 0 and 7 in 1

level intervals with the or cursor buttons.

Center Width allows you to gradually spread the

center channel sound into the front left and right

speakers.

At its widest setting, all the sound from the

center is mixed into the left and right.

This control may help achieve a more spacious

sound or a better blend for the front image.

If “NONE” was selected for the Center speaker

setting, in the Speaker size set up menu, then

this setting will not appear.

After you complete this portion of the set up, move

cursor to “MAIN” with the or cursor buttons and

press the ENTER button.

4PL II MUS I C PARAMET ER

PARAMETER : DEFAULT

PANORAMA : OFF

DIMENSION : 4

CENTER WI DTH : 0

MA I N EX I T

3 PREFERENCE

Select “PREFERENCE” in the SETUP MAIN

MENU with the

or cursor buttons, and

press the ENTER button.

To select a desired content, press the or

cursor buttons.

STANDBY MODE:

When this function is set to “ECONOMY”, you

can reduce the power consumption when the

unit is in the standby mode.

Note:

• TV-AUTO and RS-232C are disabled in the

“ECONOMY” setting.

TV AUTO:

Select the TV AUTO ON/OFF function to enable

or disable with the or cursor buttons. (refer

to page 29)

OSD Info:

Select the OSD information function to enable or

disable with the or cursor buttons.

If you select “ENABLE”, the SR7500 will display

the status of the feature (Volume up/down, input

select, etc..) on the TV monitor. But if you do not

desire this information, select “DISABLE ”.

VIDEO CONVERT:

Select the VIDEO CONVERT function to enable

or disable with the or cursor buttons. (Video

cable connection: Refer to page 24)

LFE LEVEL:

Select the output level of the LFE signal included

in the Dolby Digital signal or the DTS signal.

Select 0 dB, -10 dB or OFF with the or

cursor buttons.

After you complete this portion of the set up, move

the cursor to “MAIN” with the or cursor buttons

and press the

ENTER

button.

3 PREFERENCE

STANDBY MODE : ECONOMY

TV-AUTO : DISABLE

OSD I NFO : ENABLE

VIDEO CONVERT : ENABLE

LFE LEVEL : 0 dB

MA I N EX I T

MIC SETUP ERROR (MIC SET ERROR)

The microphone (MC-10) is not properly

connected.

→ Check the microphone connection.

AMBI NOISE ERROR (AMBI NOISE ER)

Measurement cannot be done correctly

because of excessive ambient noise.

→ Either temporarily turn off power to noisy

devices such as air conditioning or move

them out of the room.

→ Retry measurement when the room is

quiet.

SPEAKER SET ERROR (SPK SET ERROR)

The speakers are not properly connected.

→ Recheck speaker layout and

connections.

5CSII PARAMETER

TRUBASS : 0

SRS D I ALOG : 0

MA I N EX I T

Notes:

• The measured speaker distance may differ from

the actual distance from speakers. Nevertheless,

the measured value is suitable for the speakers.

• To make changes to individual speakers, select 2.

SPEAKER SETUP on the SETUP MAIN MENU,

then select MANUAL for 2-1 SPEAKER SETUP.

• The included microphone is designed specifically

for this receiver. Other microphones do not

guarantee suitable measurement results. Use the

included microphone to conduct measurements.

• During measurement, press the ENTER or EXIT

button to cancel measurement.

• In some rooms, an error may occur during auto

speaker setup or it may not be possible to set

Speaker distance correctly because of room

acoustics. In such case, set the speaker distance by

MANUAL setup.

Error Indications During Measurement

If trouble occurs during measurement, an error

message is displayed on the monitor screen and

FL display. Those errors and their remedies are

described below. The message appearing on the

FL display is given in ( ).

SR7500N DFU_01_ENG 2_3 04.10.13, 5:14 PMPage 22 Adobe PageMaker 6.5J/PPC

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-8500 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR-8500

Marantz SR-8500 User Manual - English - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR-8500 Manual

Product: