6604
49
Zoom out
Zoom in
Previous page
1/57
Next page
46
ENGLISH
2.4. 3.
-2)
2.5. 1. 3.
-1)
BASIC OPERATION (TUNER)
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your country’s standard is 9 kHz step,
touch “AM” button on the remote more than 6 seconds. Scan step will
change.
Note:
• Preset memory for the tuner will clear by changing this setup.
AUTO TUNING
(USING THE SR8300)
1.
To select tuner and desired band (FM, LW or AM), press the
TUNER button on the front panel.
2.
Press F/P button on the front panel to display the frequency.
3.
Press the TUNING UP or DOWN button on the front panel for
more than 1 second to start the Auto tuning function.
4.
Automatic searching begins then stops when a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM, LW or AM), tap desired
band FM, LW or AM on the remote.
2.
Touch Tuning^ or Tuning
v
more than 1 second on the remote.
3.
Automatic searching begins then stops when a station is tuned in.
If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
MANUAL TUNING
(USING THE SR8300)
1.
To select tuner and desired band(FM, LW or AM), press the
TUNER button on the front panel
2.
Press the F/P(Frequency/Preset) button on front panel , to
appears frequency on the display.
3.
Press the TUNING UP or DOWN button.
(Using the remote control unit)
1.
To select tuner and desired band(FM, LW or AM), tap desired
band FM, LW or AM on the remote.
2.
Tap Tuning^ or Tuning
v
on the remote to tune in the desired
station.
DIRECT FREQUENCY CALL
1.
To select tuner and desired band(FM, LW or AM), tap desired
band FM, LW or AM on the remote.
2.
Tap the Freq. Direct on the remote, display will show “FREQ -- --”.
3.
Input your desired station’s frequency with ten keypad on the
remote.
4.
The desired station will automatically be tuned.
(FM) TUNING MODE (AUTO STEREO OR MONO)
When in the auto stereo mode, AUTO indicator keeps to light on the
display.
The “ST” indicator lights on when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and “ST
indicators turn off.
If the signal is weak, it may be difficult to tune into the station in stereo.
In such a case, press the T-MODE button n the front panel or tap
Streo/Mono on the remote control unit.
AUTO” indicators turn off, FM stereo broadcasts are received in
monaural and the “ST” indicator turns off.
To return to auto stereo mode, press the T-MODE button or tap Streo/Mono
on the remote control unit again. AUTO indicator lights on the display.
PRESET MEMORY
With this unit you can preset up to 50 FM/LW/AM stations in any order.
For each station, you can memorize the frequency and reception
mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM, LW and AM band and
enters all stations with proper signal strength into the memory.
1.
To select FM , press the TUNER button on the front panel.
2.
While pressing the MEMO button, press the TUNING UP or
DOWN button to up.
AUTO PRESET” will appear on the display, and scanning starts
from lowest frequency.
1.
2.
3. 2. 1.
1.
2.
2.
1.
3.
VOLUME
UPDOWN
PHONES
MUTE ATTENTER
NIGHT
7.1CH-IN DSS TAPE CD-R TUNERCDTV VCR 1 VCR2/DVD-R
MULTI-SPK
MULTI ROOM
AUX1S-DIRECT
AUX2A/D
SLEEP
T-MODE P-SCANF/P
AUX1 INPUT
R
AUDIO
L
VIDEO
S-VIDEO
DIGITAL
MEMO
CLEARDISPLAY
DVD
TUNINGDOWN UP
3. 2. 1.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-8300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-8300 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR-8300

Marantz SR-8300 User Manual - English - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info