CHECKING THE TIME
To check the time, hold down the > button for three
seconds or more. The current time is displayed for
five seconds.
Note:
• Although the remote control uses a quartz clock,
the time may become out of sync over the course
of operation. Be sure to correct the clock from
time to time.
GENERAL INFORMATION OF
RC8500SR TO SR7500
To control the SR7500 by your RC8500SR, you
have to select the device AMP or TUNER by
pressing the function selector button. Please refer
below for the details in AMP and TUNER mode.
SOURCE ON/OFF Turns the SR7500 on and off
POWER ON Turns the SR7500 on
POWER OFF Turns the SR7500 off
D1 - D5 / >(Page) (Refer to page vi)
VOL +/- Adjust the over all sound level
MUTE Decreases the sound temporarily
Cursor Move the cursor for setting in “On screen display” mode
OK Enter the “On screen display”
Confirms the setting in “On screen display” mode
MENU Displays the current setting on the monitor
EXIT Exits from SETUP MENU
TEST (1) Enter the test tone menu
CH.SEL (2) Call up SETUP MENU and adjusts speaker levels or 7.1ch
input level
SURR (3) Selects the surround mode
7.1CH (4) Selects the 7.1CH IN
ATT (5) Reduces the input level
SPK-AB (6) Selects the speaker system
DISP (7) Changes the front display mode
OSD (8) Selects the “On screen display” on and off
SLEEP (9) Sets the sleep timer function
THX (0) Selects the THX mode
Function selector Selects a particular source component
GUIDE / LIP.SYNC Selects the LIP.SYNC mode
D1 - D5 / >(Page) (Refer to page vi)
CH +/- Selects a preset station up and down
GUIDE Selects the “Frequency direct input”
0–9 Input the numeric
MEMO Enter the tuner preset memory numbers
CLEAR Clears the inputting
TUNER Selects a frequency band
