6592

Marantz SR-7300 Manual

45
Zoom out
Zoom in
Previous page
1/54
Next page
41
ENGLISH
LEARN MODE
The remote controller is capable of learning and memorizing the
remote control codes used by almost any other remote controller you
may already own.
• If no commands have been programmed for a particular function
button, the remote controller will transmit whatever codes have
been factory preset.
• The following example shows how to program your remote
controller and how to use the codes for a DVD player.
LEARNING PROCEDURE
1.
Place the remote controller so that its infrared signal transmitter is
facing the infrared signal receiver on the Marantz remote
controller at a distance of about 5 centimeters.
2.
Press and hold down the T.MODE and MEMObuttons until
LEARN is displayed in the display.
3.
Select the Function button to select the function.
• Selected function is displayed and LEARN is blinking.
4.
Select the button to be learned.
• LEARN is displayed.
5.
Press and hold the button of the original remote controller to learn
until OK in the display.
• When NG is displayed, repeat this step.
• When FULL is displayed, the memory of the RC7300SR is full.
If you want to learn the code, you should erase other learned
button.
6.
Repeat steps
4
and
5
to learn other buttons in same function.
7.
Repeat steps
3
to
6
to learn other function.
8.
When you have finished programming the remote controller,
press and hold down the OK button until USE is displayed in the
display.
Note:
• When NG is displayed in step 5 again, the transmitting code is
unavailable for RC7300SR, or the transmitting signal is
intercepted by noise.
• If no buttons are pressed for approximatelly 1 minutes while in
the LEARN mode, the remote controller automatically returns
to the use mode.
ERASING LEARNING CODE
Erasing the code by buttons
1.
Press and hold down the T.MODE and MEMO buttons until
LEARN is displayed in the display.
2.
Select the Function button to select the button to be erased.
• Selected function is displayed and LEARN is blinking.
3.
Press and hold down the CL button and press the learned button
twice to be erased.
• CLR is displayed for 3 seconds and the mode returns to LEARN
mode.
4.
To return the USE mode, press and hold down the OK button ⁄5
until USE is displayed in the display.
Erasing the code by functions
1.
Press and hold down the T.MODE and MEMO buttons until
LEARN is displayed in the display.
2.
Press and hold down the CL button and press the learned
Function button twice to be erased.
• F-CLR and LEARN are blinking.
3.
Press OK button to continue erasing.
• F-CLR is displayed for 3 seconds and the mode returns to
LEARN mode.
• To cancel the erasing operation, do not press OK button and
simply touch any other button.
4.
To return the USE mode, press and hold down the OK button
until USE is displayed in the display.
x 2
x 2
5 cm
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-7300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-7300 in the language / languages: English as an attachment in your email.

The manual is 4,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info