6584

Marantz SR-6400 Manual

20
Zoom out
Zoom in
Previous page
1/38
Next page
17
ENGLISH
ENGLISH
SURR. L:
Set the distance from the surround left speaker to
your normal listening position between 1 and 30
feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-
meter intervals).
SURR. R :
Set the distance from the surround right speaker
to your normal listening position between 1 and
30 feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-
meter intervals).
SUB W :
Set the distance from the subwoofer to your
normal listening position between 1 and 30 feet in
1.0-foot intervals
(0.3 to 9 meters in 0.3-meter intervals).
SURR. BACK:
Set the distance from a surround back speaker
to your normal listening position between 1 and
30 feet in 1.0-foot intervals (0.3 to 9 meters in
0.3-meter intervals).
Notes
• For the speakers that you have selected "None"
the Speaker Size menu will not appear.
2-3 SPEAKERS LEVEL
H
ere you will set the volume for each speaker so
that they are all heard by the listener at the same
level. We recommend using a SPL (Sound Pressure
Level) meter, when available.
Note:
• The speaker level settings are not available in 6.1
channel input mode and S-Direct mode.
TEST MODE :
Selects “MANUAL” or “AUTO” for generating
the mode of the test tone with the or cursor
buttons.
If you select “AUTO” , the test tone will be cycled
through in a circular pattern which is Left →Center
→ Right → Surround Right → Surround Back →
Surround Left → Subwoofer → Left →..
increments of 3 seconds for each channel.
Using the or cursor buttons, adjust the volume
level of the noise from the speaker so that it is the
same level for all the speakers.
If you select “MANUAL”, adjust the output level of
each speaker as listed below.
1.
When you move the cursor to FRONT L by
pressing the cursor button, the SR6400 will
emit a pink noise from the front left speaker.
Remember the level of this noise and then
press the cursor button.
(Note that this can be adjusted to any level
between -10 and +10 dB in 1 dB intervals
except the subwoofer setting. The subwoofer
can be adjusted to any level between -15 and
+10 dB in 1 dB intervals.)
The SR6400 will now emit the pink noise from
the center speaker.
2.
Using the and cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker.
3.
Press the cursor button again. The SR6400
will now emit the pink noise from the front right
speaker.
4.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
After you complete this portion of the set up, press the
OK button, the cursor will move to “MAIN” and then
press the OK button to go to SETUP MAIN MENU.
Notes:
• Speakers that you selected “None” for in the
Speaker Size menu will not appear.
• To adjust the speaker levels for 6.1-channel input
sources, you will need to use the 6.1CH-INPUT
sub menu. (See page 18).
2-2 SPEAKERS DISTANCE
Use this parameter to specify the distance of each
speaker’s position from the listening position. The
delay time is automatically calculated according to
these distances.
Begin by determining the ideal or most commonly
used seating position in the room.
This is important for the timing of the acoustics to
create the proper sound space that the SR6400
and today’s sound systems are able to produce.
Note : For speakers that you have selected “None”
the Speaker Configuration sub-menu will not appear
here. (There are several useful books and special
DVD and LD’s available to guide you through proper
home theater configuration. If you are unsure, have
your Marantz dealer perform the installation for you.
They are trained professionals familiar with even
the most sophisticated custom installations.
Marantz recommends the WWW.CEDIA.ORG
website for further information about this).
1.
To select each speaker , press the or cursor
buttons.
2.
To set the distance for each speaker , press
the or cursor buttons.
3.
After you complete this portion of the set up,
move the cursor to “NEXT” with the or cursor
buttons and then press the OK button to go to
the next page.
FRONT L :
Set the distance from the front left speaker to
your normal listening position between 1 and 30
feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-
meter intervals).
FRONT R :
Set the distance from the front right speaker to
your normal listening position between 1 and 30
feet in 1.0 foot intervals (0.3 to 9 meters in 0.3-
meter intervals).
CENTER :
Set the distance from the center speaker to your
normal listening position between 1 and 30 feet
in 1.0 foot intervals (0.3 to 9 meters in 0.3-meter
intervals).
2 - 2 SPEAKERS D I STANCE
FRONT L : 10 f t 3 . 0 m
FRONT R : 10 f t 3 . 0 m
CENTER : 1 0 f t 3 . 0 m
SURR . L : 1 0 f t 3 . 0 m
SURR . R : 10 f t 3 . 0 m
SUB W : 10 f t 3 . 0 m
SURR . BACK : 1 0 f t 3 . 0 m
MA I N RETURN NEXT EX I T
2-3 SPEAKERS LEVEL
T EST MODE : MANUAL
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR .R : 0 dB
SURR . BACK : 0 dB
SURR . L : 0 dB
SUB W : 0 dB
MA I N RE TURN E X I T
3 PREFERENCE
1.
Select “PREFERENCE” in the SETUP MAIN
MENU with the or cursor buttons, and press
the OK button.
2.
To select a desired content, press the or
cursor buttons.
STANDBY MODE:
When this function is set to “ECONOMY”, you
can reduce the power consumption when the
unit is in the standby mode.
Note:
• TV-AUTO and RS-232C are disabled in the
“ECONOMY” setting.
TV AUTO:
Select the TV AUTO ON/OFF function to enable
or disable with the or cursor buttons. (refer to
page 23)
OSD Info:
Select the OSD information function to enable or
disable with the or cursor buttons.
If you select “ENABLE”, the SR6400 will display
the status of the feature (Volume up/down, input
select, etc..) on the TV monitor. But if you do not
desire this information, select “DISABLE ”.
After you complete this portion of the set up, move
the cursor to “MAIN” with the or cursor buttons
and press the OK button.
3PREFERENCE
S TANDBY MODE : ECONOMY
TV-AUTO :
∗∗∗ ∗∗∗
∗∗∗ ∗∗∗
∗∗∗
OSD I NFO : ENABLE
MA I N E X I T
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-6400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-6400 in the language / languages: English as an attachment in your email.

The manual is 3,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info