Manual Marantz SR-5600 (page 28 of 41) (English)

6578

Zoom out

Zoom in

1/41

ENGLISH

EX/ES

This mode provides 6.1 channel surround for

DOLBY DIGITAL EX, DTS-ES encoded source

material such as DVD.

This mode cannot be used when an analog input

has been selected.

Dolby Digital EX

In a movie theater, film soundtracks that have

been encoded with Dolby Digital surround EX

technology are able to reproduce an extra channel

which has been added during the mixing of the

program.

This channel, called Surround Back, places

sounds behind the listener in addition to the

currently available front left, front center, front

right, surround right, surround left and subwoofer

channels.

This additional channel provides the opportunity

for more detailed imaging behind the listener and

brings more depth, spacious ambience and sound

localization than ever before.

Dolby Digital EX is not available in the system

without surround back speaker(s).

DTS-ES (Discrete 6.1, Matrix 6.1)

DTS-ES adds the surround center channel audio

to the DTS 5.1-channel format to improve the

acoustic positioning and makes acoustic image

movement more natural with the 6.1-channel

reproduction.

This receiver incorporates a DTS-ES decoder,

which can handle DTS-ES Discrete-encoded and

DTS-ES Matrix-encoded program sources from

DVD, etc..

DTS-ES Discrete 6.1 features digital discrete

recording of all channels including the surround

back channel(s) and higher quality of audio

reproduction.

DTS-ES is not available in the system without a

surround back speaker.

dts MODE

(dts, Neo:6 Cinema, Neo:6 Music)

This mode is for DTS encoded source materials

such as LASER DISC, CD, and DVD. Neo:6 is for

some 2 channel sources.

dts : This mode is enabled when playing source

materials encoded in dts multichannel.

Playing multichannel encoded 5.1-channel dts

sources provides five main audio channels (left,

center, right, surround left and surround right) and

Low Frequency Effect channel.

dts-ES decoding is not available in this mode.

The DTS mode cannot be used when an analog

input has been selected.

Neo:6 Cinema, Neo:6 Music

This mode decodes 2-channel signals into 6-

channel signals using high-accuracy digital matrix

technology.

The DTS NEO:6 decoder has near-discrete

properties in the frequency characteristics of the

channels as well as in channel separation.

According to the signals to be played back, DTS

NEO:6 uses either the NEO:6 CINEMA mode

optimized for movie playback or the NEO:6 MUSIC

mode optimized for music playback.

Notes:

•

Neo:6 mode is available to 2ch input signals which

are encoded in Dolby Digital or PCM format.

• PCM-audio signals can be subjected to Pro Logic

processing when the sampling frequency is 32

kHz, 44.1 kHz or 48 kHz.

MULTI CH. ST

This mode is used to create a wider, deeper and more

natural soundstage from two channel source material.

This is done by feeding the left channel signal to

both left front and left surround speaker and the

right channel signal to both right front and right

surround speaker. Additionally, the center channel

reproduces a mix of the right and left channel.

CIRCLE SURROUND

(CS

-CINEMA, CS

-MUSIC, CS

-MONO)

Circle Surround is designed to enable multichannel

surround sound playback of non-encoded and

multichannel encoded material.

Backward compatibility provides listeners with up

to 6.1 channels of surround performance from

entire collection of music and film, including

broadcast, videotape and stereo recorded music.

Depending on source material, you can select

CSII -Cinema mode, CSII -Music mode or CSII -

Mono mode.

Cinema mode

This mode is suited for playing back Circle

Surround-encoded and non-encoded film and

television soundtracks. Cinema Mode enables 6.1-

channel surround playback of 2-channel sources

such as Video Cassettes, TV broadcasts,

streaming media and DVDs.

Music mode

This mode is suited for playing back Circle

Surround-encoded and non-encoded music.

Music Mode decodes, music DVDs, radio and TV

music broadcasts and CDs into enveloping 6.1-

channel surround.

-Mono mode

This mode plays back monaural recordings from

any source, including CDs, DVDs and TV and

radio broadcasts in compelling 6.1-channel

surround.

Notes:

• CS II mode is available for 2ch input signals

which are encoded in Dolby Digital or PCM

format.

• PCM-audio signals can be subjected to Pro Logic

processing when the sampling frequency is 32

kHz, 44.1 kHz or 48 kHz.

VIRTUAL

This mode creates a virtualized surround sound

experience from a two-speaker (front L and R)

playback system playing any multichannel audio

source (such as found on DVDs and digital

broadcasts), including Dolby Digital, Dolby Pro

Logic or DTS.

STEREO

This mode bypasses all surround processing.

In stereo program sources, the left and right

channels play normally when PCM-audio or

analog stereo is input.

With Dolby Digital and DTS sources, the 5.1

multichannels are converted to two channel

stereo. 96 kHz PCM source material can be played

back in stereo mode.

PURE-DIRECT

In the Pure Direct mode, the tone control circuit

and bass management configuration are bypassed

for full range frequency response and the purist

audio reproduction.

96 kHz PCM source material can be played back in

this mode.

Notes:

• Internal speaker size is setup to front L/R =

LARGE, Center = LARGE, Surround L/R =

LARGE and Subwoofer = YES automatically.

Tone controls and additional processing are also

defeated.

• When you use this mode with certain DVD and

CD players, performing operations such as “Skip”

or “Stop” may momentarily interrupt the output.

CAUTION

NOTE for DTS signal

* Connected DVD-player, laser-disc player or CD-

player needs to support DTS-digital output. You

may not be able to play some DTS source

signals from certain CD players and LD players

even if you connect the player to the SR5600

digitally. This is because the digital signal has

been processed (such as the output level,

sampling frequency, or frequency response)

and the SR5600 cannot recognize the signal as

DTS data.

* Depending on the player used, DTS play may

produce a short noise. This is not a malfunction.

* While signals from DTS-laser disc or CD are

playing in another Surround mode, you cannot

switch to digital input or from digital input to

analog input by INPUT SETUP in SETUP MAIN

MENU or the A/D button.

* The outputs for the VCR 1 OUT, DSS/VCR 2

OUT, TAPE OUT, and CD-R OUT output analog

audio signals. Do not record from CDs or LDs

that support DTS using these outputs. If you do,

the DTS-encoded signal will be recorded as

noise.

NOTE for Dolby Digital Surround EX signal

* When playing Dolby Digital Surround EX-

encoded software in 6.1 channels, it is required

to set the EX/ES mode.

* Note that some of Dolby Digital Surround EX-

encoded software does not contain the

identification signal. In this case, set the EX/ES

mode manually.

NOTE for 96kHz PCM audio

* AUTO, PURE-DIRECT, and STEREO modes

can be used when playing PCM signals with a

sampling frequency of 96 kHz (such as from

DVD-Video discs that contain 24 bit, 96 kHz

audio). If such signals are input during playback

in one of the other surround modes, output from

SR5600 will be muted.

* Certain DVD player models inhibit digital output.

For details, refer to the player’s operation

manual.

* Some DVD formatted discs feature copy

protection. When using such disc, 96 kHz PCM

signal is not output from the DVD player. For

details, refer to the player’s operation manual.

NOTE for HDCD signal

* HDCD is effective only at the time of digital

input.

* AUTO, PURE DIRECT, and STEREO modes

can be used when playing HDCD signals (such

as from CD discs that contain HDCD).

* You may not be able to play some HDCD source

signals from certain CD players if you connect

the player to the SR5600 digitally. This is

because the digital signal has been processed

(such as the output level, sampling frequency, or

frequency response) and the SR5600 cannot

recognize the signal as HDCD data.

SR5600U DFU_01_ENG 2_2 05.6.3, 3:43 PMPage 25 Adobe PageMaker 6.5J/PPC

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-5600 in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantz SR-5600 Manual

Product: