6578
24
Zoom out
Zoom in
Previous page
1/41
Next page
ENGLISH
21
8 7.1 CH INPUT LEVEL
This sub-menu is to adjust the speaker levels for
7.1-channel input sources.
Here you will adjust the volume for each channel so
that they are all heard by the listener at the same
level.
1.
Select 7.1CH INPUT in the SETUP MAIN
MENU with the
or cursor buttons, and
press the ENTER button.
2.
To select VIDEO IN, press or cursor
button.
3.
Using the or cursor buttons, select the
video input source which is emitted from
Monitor out in the 7.1 CH INPUT function.
The input source is switched by pressing the
or cursor buttons as follows;
LAST TV DVD VCR1 DSS
AUX1 V-OFF LAST
Notes:
When select LAST, the source is set previous
source before 7.1 CH INPUT function
is activated.
When select V-OFF, no signal is emitted from
monitor out terminal.
4.
To Select desired channel , press the or
cursor buttons.
5.
Using the or cursor buttons, adjust the
volume level of each channel.
6.
After you complete this portion of the set up,
move the cursor to MAIN with the
or
cursor buttons and press the ENTER button.
Notes:
These settings will be memorized to 7.1CH INPUT
source.
This feature can be directly selected with the
CH.SEL button of the remote controller.
87.1CHINPUTLEVEL
VIDEO IN : LAST
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR . R : 0 dB
SURR . B R : 0 dB
SURR . B L : 0 dB
SURR . L : 0 dB
SUB W : 0 dB
MA I N E X I T
LEVEL (VOLUME LEVEL):
Adjust the Multi-speaker output level with or
cursor button.
Note:
This setting can be changed when the Surr Back is
set NONE in 2-1 SPEAKER SIZE menu.
When this setting is unavailable, ✽✽✽ is
displayed
MAIN ROOM STATUS:
Selected input source in the main room will be
displayed.
Note:
If VOLUME is set to FIXED, the multi-room
output level cannot be adjusted from the second
zone.
After you complete this portion of the set up, move
the cursor to MAIN with
or cursor buttons and
press ENTER button.
9 SPEAKERS LEVEL SETTING
WITHOUT TEST TONE
Channel level (speaker level) can be adjusted
without using test tone.
Note:
Four channel level settings can be memorized for
reproduction: the 7.1 ch input mode, CS mode,
Multi channel stereo mode, and all other surround
modes, respectively.
1.
Set the surround mode or 7.1 ch input mode
which you want to adjust the channel level.
2.
Press the CH.SEL button on the remote.
3.
Select the desired channel (speaker) with the
or cursor buttons.
4.
Adjust the level with the or cursor buttons.
5.
After completing the setup, press the CH.SEL
button again.
C H L E V E L AD J US T
FRONT L : 0 dB
CENTER : 0 dB
FRONT R : 0 dB
SURR . R : 0 dB
SURR . B R : 0 dB
SURR . B L : 0 dB
SURR . L : 0 dB
SUB W : 0 dB
SR5600U DFU_01_ENG 2_2 05.6.3, 3:43 PMPage 21 Adobe PageMaker 6.5J/PPC
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-5600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-5600 in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info